Setting the units of measurement: Reset to
automatic settings
This function allows you to restore the automatic
settings for the units of measurement of all
indications displayed on the instrument panel.
You open the "UNITS SETTING" menu, as described
on the previous pages. Select "DEFAULT" option, by
pressing button (1) or (2).
Once function is highlighted, press CONFIRM MENU
button (4) for 2 seconds. PLEASE WAIT... will be
displayed for 3 seconds, then DEFAULT OK will be
displayed for 2 seconds, and then the UNITS
SETTING menu page with the EXIT option
highlighted.
To exit the menu and go back to previous page, select
EXIT and press button (4).
149