Husqvarna R 322TX AWD Operator's Manual page 18

The drive system lever for the front axle is found behind
the left front wheel.
To lift and lower the cutting deck
To lift the cutting deck to transport position, pull the lift
lever rearward. If the engine is on, the blades stop to
rotate automatically.
To lower the cutting deck to mowing position, press the
lock button and move the lift lever forward. If the engine
is running, the blades start to rotate automatically.
To apply and release the parking brake
1. Press the parking brake pedal down (1).
18
2. Press and hold the lock button (2).
1
3. Keep the button pressed and release the parking
brake pedal.
4. To release the parking brake, press the parking
brake pedal again.
To start the engine
1. Make sure that the drive system is engaged, see
engage and disengage the drive system on page 17 .
2. Lift up the cutting deck and apply the parking brake.
3. Turn the ignition key to the start position.
2
To
2
1
849 - 004 - 21.10.2019