Hettich EBA 270 Operating Instructions Manual page 26

EN
 Repairs must only be carried out by personnel authorised to do so by the manufacturer.
 Only original spare parts and original accessories licensed by the Andreas Hettich GmbH & Co. KG company are
allowed to be utilised.
 The following safety regulations apply:
EN / IEC 61010-1 EN / IEC 61010-2-020 as well as their national deviations.
 The safe operation and reliability of the centrifuge can only be guaranteed if:
 the centrifuge is operated in accordance with the operating instructions,
 the electrical installation on the site where the centrifuge is installed conforms to the demands of EN / IEC
stipulations.
 Meeting the country-specific requirements concerning occupational safety with regard to the use of laboratory
centrifuges at the workplaces provided for this purpose by the user is the responsibility of the user.

The unlocking pin made of plastic included in delivery may only be used for emergency unlocking (see the
chapter "Emergency unlocking").
The unlocking pin is to be kept in a safe place so that it is protected from unauthorized access.
26/66 Rev. 07 AB2300DEENFRIT