Dell PowerEdge FC830 Owner's Manual page 91

Tarjeta rSPI (opcional)
rSPI (restore Serial Peripheral Interface) es un dispositivo flash SPI para el almacenamiento de información acerca de la Etiqueta
de servicio del sistema, la configuración del sistema o la licencia de iDRAC.
Removing the optional rSPI card
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
NOTE: You must remove the rSPI card to replace a faulty rSPI card or service other components inside the system.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Keep the #2 Phillips screwdriver ready.
Steps
1. Remove the two screws securing the rSPI card to the system board.
CAUTION: To prevent damage to the rSPI card, hold the card only by its edges.
2. Lift the card away from the system.
Figure 32. Removing the rSPI card
1. screw (2)
3. standoff (2)
Next steps
1. Install the rSPI card.
2. rSPI card
4. connector
Instalación y extracción de componentes del sled 91