Download Print this page

Dell PowerEdge FC830 Owner's Manual page 137

Hide thumbs Also See for PowerEdge FC830:

Advertisement

Available languages

Available languages

Figure 73. Installing the system board
a. system board
Next steps
1. Install the following:
a. internal USB key
b. SD vFlash card
c. IDSDM card orrSPI card
d. NDC
e. tarjeta intermedia PCIes
f. expander card
g. storage controller card
h. hard-drive cage or SSD cage
i.
hard-drive backplane or SSD backplane
j.
hard drives or SSDs
NOTE:
Ensure that you reinstall the hard drives or SSDs in their original locations.
k. cooling shroud
l.
memory modules
m. processor(s) and heat sink(s)
2. Remove the plastic I/O connector covers from the back of the system.
3. Follow the procedure listed in the After working inside your system section.
Instalación y extracción de componentes del sled
137

Advertisement

loading

This manual is also suitable for:

Poweredge fx2Poweredge fx2sE03b