Software installation
2.3 Alternative software packets
Procedure
Note
The procedure recommended here deletes the entire SIMATIC NET PC software on the
PG/PC not only the driver for the communications processor.
Uninstall the entire software package as described and recommended in the installation
manual "SIMATIC NET PC Software".
You will find the installation manual on the SIMATIC NET DVD or on the Product Support
pages under the following entry ID:
61630923 (http://support.automation.siemens.com/WW/view/en/61630923)
2.3
Alternative software packets
Alternatives to SIMATIC NET PC software
To operate the CP, alternative software packages such as STEP 7 V5.5 or STEP 7
Professional (TIA Portal) are available. You will find current information on this on the
Product Support pages under the following entry ID:
47071380 (http://support.automation.siemens.com/WW/view/en/47071380)
16
Operating Instructions, 09/2013, C79000-G8976-C281-03
CP 5623/CP 5624