Siemens CP 5623 Operating Instructions Manual page 4

Preface
● Configuration manual Commissioning PC Stations
This provides you with detailed information on commissioning and configuring SIMATIC
NET PC communications modules.
Entry ID:
● System manual SIMATIC NET Industrial Communication with PG/PC
– Volume 1– Basics
– Volume 2– Interfaces
● Installation manual SIMATIC NET PC Software
This document contains detailed information on installing the SIMATIC NET
PC software.
Entry ID:
● System manual PROFIBUS Network Manual
SIMATIC NET documentation
You will find the entire SIMATIC NET documentation on the pages of Product Support:
10805878 (http://support.automation.siemens.com/WW/view/en/10805878)
Go to the required product group and make the following settings:
→ Entry list → Entry type "Manuals / Operating Instructions"
Service & Support
In addition to the product documentation, the comprehensive online information platform of
Siemens Automation Customer Support supports at any time and at any location in the
world. You will find the Service & Support pages on the Internet at the following address:
(http://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo2&aktprim=99&lang=
en)
Apart from news, you will also find the following information there:
4
13542666 (http://support.automation.siemens.com/WW/view/en/13542666)
Entry ID:
42783968 (http://support.automation.siemens.com/WW/view/en/42783968)
Entry ID:
42783660 (http://support.automation.siemens.com/WW/view/en/42783660)
The system manuals introduce the topic of industrial communication and explain the
communications protocols used. There is also a description of the OPC interface as
user programming interface.
42784913 (http://support.automation.siemens.com/WW/view/en/42784913)
In this document you will find detailed information about setting up a PROFIBUS network.
Entry ID:
35222591 (http://support.automation.siemens.com/WW/view/en/35222591)
Operating Instructions, 09/2013, C79000-G8976-C281-03
CP 5623/CP 5624