TABLE OF CONTENTS 1) Introduction 2) Unpacking your amplifier_______ 3) Hooking up your amplifier ____ 4) Operation of your amplifier 5) Troubleshooting 6) Registration card 7) Tube and Fuse values 8) Specifications 9) Warranty...
The DragoN hybrid amplifier combines the best of tube and solid state amplification to give you great tube amp sound without any of the normal tube amp maintenance.
HOOKING UP YOUR AMPLIFIER Connecting the amplifier to the loudspeakers: The rear panel has five way binding posts with which you can connect your loudspeakers as shown in Figure 1. These binding posts accommodate any of the popular speaker terminations available including spades and bananas. Connecting the amplifier to the preamplifier: There are two types of input connections on the rear panel of the amplifiers: 1) Fully balanced XLR type input.
OPERATION OF YOUR AMPLIFIER After all proper connections have been made you are now ready to turn the amplifier on. The main power on/off switch is on the rear of the amplifier and should be left on at all times. A small amount of power is used by the amplifier to maintain a ready state which keeps the solid state components warmed up for better performance.
Included with this manual is an Owner and Warranty Registration Form. Please take a minute to fill out this card and return it to Rogue Audio. This card must be returned within 30 days of purchase to validate the warranty.
Rogue Audio warrants the vacuum tubes for a period of six months from the date of retail purchase. Any defective parts will be replaced free of charge, excluding shipping and handling.