Safety Instructions - Ravas RPW-310-EL Operator's Manual

1. SAFETY INSTRUCTIONS

1. All safety regulations that apply on the electric pallet truck remain valid and
unchanged
2. No weighing operation is allowed while others are on or near the load.
3. No weighing operations allowed if any objects are in the vicinity; around, or
close to the load.
4. RAVAS is not responsible for physical harm done to the operator because of
the presence of the indicator.
5. Any modifications done to the system must be approved in writing from the
supplier, prior to any work being completed.
6. It is the sole responsibility of the purchaser to train their own employees in the
proper use and maintenance of this equipment.
7. Do not operate this unit unless you have been fully trained of its capabilities.
8. Do not use the weighing system in potentially explosive areas.
9. Do not weld to the lift truck without disconnecting the pressure sensor.
10. Check the accuracy of the scale on a regular basis to prevent faulty readings.
11. Only trained and authorized personnel are allowed to operate the scale.
12. Always follow the operating, maintenance and repair instructions of this truck
and ask the supplier when in doubt.
13. Never lower loads if you are unsure you can place the goods on a stable
surface. Personal injury may result from placement on an unstable
environment.
14. RAVAS is not responsible for errors that occur due to incorrect weighings or
inaccurate scales.
3