Ravas RPW-310-EL Operator's Manual page 15

FILLING:
Place an empty container on the scale.
Press the T key.

The display shows the net value and the pointers stp1 and stp2 are on.

Relays 1 and 2 are closed.

As soon as set-point 1 is reached, pointer stp1 will turn off and relay 1 will be

opened.
As soon as set-point 2 is reached, pointer stp2 will turn off and relay 2 will be

opened.
The display shows "done" for a few seconds and will return in the normal

weighing mode.
The net weight is displayed. A printout may be made at this point.

It is possible to cancel the filling procedure at any time by pressing the CE key (see
page 18).
DOSING:
Place a full container on the scale.
Press the T key.

The display shows the net value and the pointers stp1 and stp2 are on.

Relays 1 and 2 are closed.

As soon as set-point 1 is reached, pointer stp1 will turn off and relay 1 will be

opened.
As soon as set-point 2 is reached, pointer stp2 will turn off and relay 2 will be

opened.
The display shows "done" for a few seconds and returns in the normal

weighing mode.
The net weight is displayed. A printout may be made at this point.

It is possible to cancel the dosing procedure at any time by pressing the CE key (see
page 18).
The printout will show the following:
- The gross weight is the weight of the container with rest material.
The tare weight is the weight of the container with material before dosing.
-
The net weight will show a minus sign as token of weight being removed from the
-
scale.
DOSING / FILLING with Automatic Tare & Start
In this setting set-point 1 and 2 are switched on as soon as the set-point values have
been entered. The tare action is done automatically in this mode.
To enter new set-point values:
Press the key.

The display shows the last entered value with the left digit blinking. The pointer

for set-point 1 is on.
Press ↵ to accept the old value.

The value for set-point 1 is activated. The display shows the last entered value

for set-point 2 with the left digit blinking. The pointer for set-point 2 is on.
15