Ravas RPW-310-EL Operator's Manual page 24

PARAMETERS:
Parameter
01 Start-up unit (and print units)
02 Smallest graduation step for
multi-range
03 Largest graduation step for
multi-range
04 Number of graduations for
every range
05 Weighing capacity system (full
scale)
06 Motion tolerance for stable
07 Filter size
08 Auto zero range
09 Zero range positive (+)
10 Zero range negative (-)
11 Test Function
12 Power On zero
13 Approved
14 Start-up number to add in
sampling mode
15 Units switch mode active
16 Setpoint function
Function
1=kg / 2=lb
0.1/0.2/0.5............10/20/50
0.1/0.2/0.5 ........... 10/20/50
0000-9900 divisions
0000-99999 units
0-32
off
1 grad./sec
4 grad./sec
16 grad./sec
0-12
0=off
1=light filtering, 12=heavy filtering
0=off
1=division
0-100% (approved 2%) of span
0-100% (approved 2%) of span
BASIC
10x Resolution
Yes / No
None, NTEP, OIML, NTEPC
1-2-5-10-20-50-95
Yes / No
0-14
0 (not used), 1 (gross overload), 2 (net overload), 3
(fill manual tare), 4 (fill auto tare), 5 (gross overload
not authorize to change gross settin), 6 (net overload
not authorize to change net setting), 7(gross overload
delayed), 8 (net overload delayed), 9 (gross overload
delay not authorize to change gross setting), 10 (net
overload delay not authorize to change net
setting),11 (gross overload+errors), 12(gross
overload+err, no changes allowed), 13(gross
overload+err, delayed), 14(gross overload+err, no
changes allowed, delayed)
Settings
0.5 grad./sec
2 grad./sec
8 grad./sec
32 grad./sec
0.5 division
3 divisions
ADC Counts
Default
US
2
0.5
2
1000
5000
1
8
0.5
10
10
bASIC
No
None
10
No
0
24