SUN2000-(50KTL, 60KTL, 65KTL)-M0
User Manual
●
●
● Directly connecting an aluminum wiring terminal to the AC terminal block will
● The copper to aluminum adapter terminal or an aluminum wiring terminal
● Do not mix up the aluminum and copper sides of the copper to aluminum
Figure 5-1 Requirements for the OT terminal
Issue 06 (2020-07-07)
If a copper-clad aluminum cable is used, use a copper wiring terminal.
If an aluminum alloy cable is used, use a copper to aluminum adapter
terminal or an aluminum wiring terminal with a copper to aluminum adapter
washer.
NO TICE
cause electro-chemical corrosion and weaken the cable connection reliability.
with a copper to aluminum adapter washer must comply with IEC61238-1.
adapter washer. Ensure that the aluminum side of the washer contacts the
aluminum wiring terminal, and the copper side contacts the AC terminal block.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
36