Space Requirements - Huawei SUN2000-50KTL-M0 User Manual

SUN2000-(50KTL, 60KTL, 65KTL)-M0
User Manual
●
●
●
●
●
●
Mounting Structure Requirements
●
●
●
●

4.3.2 Space Requirements

●
Issue 06 (2020-07-07)
Do not install the inveter in areas with corrosive materials.
Do not install the inverter where its enclosure and heat sinks are easily
accessible, because the voltage is high and these parts are hot during
operation.
Install the solar inverter in a well-ventilated environment for heat dissipation
If the inverter is installed in an airtight environment, a heat dissipation device
or ventilation device must be installed to ensure that the indoor ambient
temperature is not higher than the external ambient temperature during
operation.
You are advised to install the inverter in a sheltered place or install an awning
over it.
The solar inverter will be corroded in salt areas. Before installing the solar
inverter outdoors in salt areas, consult Huawei. A salt area refers to the region
within 500 meters from the coast or prone to sea breeze. The regions prone to
sea breeze vary with weather conditions (such as typhoons and monsoons) or
terrains (such as dams and hills).
The mounting structure where the SUN2000 is installed must be fireproof.
Do not install the SUN2000 on flammable building materials.
The SUN2000 is heavy. Ensure that the installation surface is solid enough to
bear the weight load.
In residential areas, do not install the SUN2000 on drywalls or walls made of
similar materials which have a weak sound insulation performance because
the noise generated by the SUN2000 is noticeable.
Reserve enough clearance around the SUN2000 and determine an appropriate
installation tilt to ensure sufficient space for installation and heat dissipation.
Figure 4-1 Installation space requirements
Copyright © Huawei Technologies Co., Ltd.
4 Installation
23