Huawei SUN2000-50KTL-M0 User Manual page 100

SUN2000-(50KTL, 60KTL, 65KTL)-M0
User Manual
No. Parameter
4 Shutdown at 0%
power limit
5 Active power
change gradient
6 Fixed active power
derated
7 Active power
percentage
derating
8 Power factor
9 Reactive power
compensation
(Q/S)
10 Reactive power
compensation at
night (Q/S)
11 Trigger frequency
of over frequency
derating
12 Quit frequency of
over frequency
derating
13 Recovery gradient
of over frequency
derating
Issue 06 (2020-07-07)
Description
If this parameter is set to Enable,
the SUN2000 shuts down after
receiving the 0% power limit
command. If this parameter is set
to Disable, the SUN2000 does not
shut down after receiving the 0%
power limit command.
Adjusts the change speed of the
SUN2000 active power.
Adjusts the active power output
of the SUN2000 to a fixed value.
Adjusts the active power output
of the SUN2000 to a percentage.
Adjusts the SUN2000 power
factor.
Adjusts the SUN2000 output
reactive power.
If Reactive power output at
night is set to Enable, no PV
input exists, and no remote
scheduling instruction is delivered,
the SUN2000 responds to this
command.
The standards of certain countries
and regions require that the
output active power of the
SUN2000 be derated when the
grid frequency exceeds a certain
value.
Specifies the frequency threshold
for exiting overfrequency derating.
Specifies the power recovery
gradient for overfrequency
derating.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
Remarks
N/A
Adjust the active power
based on the percentage of
the rated apparent power.
Pmax_limit is the upper
limit of the maximum active
power.
If this parameter is set to
100, the SUN2000 delivers
power output based on the
maximum output power.
N/A
N/A
N/A
Fn represents the rated
frequency.
N/A
92