Huawei SUN2000-50KTL-M0 User Manual page 64

SUN2000-(50KTL, 60KTL, 65KTL)-M0
User Manual
Figure 5-25 Routing a cable
Step 3 Remove the cable terminal base from the terminal block, and connect the
communications cable to the terminal base.
Figure 5-26 Connecting cables to a terminal base
(1) RS485A IN
(3) RS485B IN
Step 4 Land the cables in the terminal block, and bond the shield layer to the ground
point.
Issue 06 (2020-07-07)
NO TE
When connecting the shielded cable, crimp the OT terminal if required.
Copyright © Huawei Technologies Co., Ltd.
(2) RS485A OUT
(4) RS485B OUT
5 Electrical Connections
56