Festo CPV GE-IB-8 Series Manual page 19

4.2 Setting the diagnostic mode (DIL2)
Diagnostic mode
Diagnosis via status inputs inactive
Diagnosis via status inputs active
PF error message: All diagnostic information is
provided via Interbus (no error suppression)
Suppression of the undervoltage for valves or
electric outputs V (local and decentral);
val
suppression V V )
out load
4.3 Setting the baud rate (DIL3)
500 kBaud
(Factory setting)
Festo CPV..-GE-IB-8 0108NH English
Setting the DIL
switches
2000 kBaud
19