________________________________________________________________________
If the machine you are working on does not currently have a Raven CAN
system, you will need a Kit, CANbus, Terminators & Power Adapter "T"
P/N 117-0159-923. This kit contains the CAN Cable Adapter Tee With
Power P/N 115-0171-368 and two(2) CANBus Terminators P/N 063-
0172-369. To install a Raven CAN system:
1. Connect CAN Tee to power and ground.
a. Locate a convenient source of power and ground near the control
b. Connect the red wire of the CAN Cable Adapter Tee With Power
c. Connect the white wire from the CAN Cable Adapter Tee With
system.
P/N 115-0171-368 to a source of clean 12 volt power.
Power P/N 115-0171-368 to a clean battery ground.
Manual #016-0171-081 Rev. B 07/08
CAN INSTALLATION
9
CHAPTER
3