Q2: Client Cannot Connect To Server - ICP DAS USA M2M-710D Faq

Q2: Client cannot connect to Server.

A2: Please follow the following steps to check that the network configuration is
correct.
Step 1: Check IP of Server and Client is the only. The IP is not the same with
the other network device.
Step 2: Please confirm the network configurations are correct. The
configurations include IP Address, Net Mask, Gateway and DNS
Server. If the configurations are all correct, it should respond to the
ping command from PC.
Step 3: Please confirm that the following settings are correct.
"Server IP" of Client is the same with "IP Address" of Server.
¾
"Communication Port" of Server and Client are the same.
¾
"Operation Mode" of Client is "Client".
¾
"Operation Mode" of Server is "Server".
¾
Net setting
4