Functional Components Of The Ct Sb2 - Omicron CT Analyzer Getting Started

2.5

Functional components of the CT SB2

PC and CTA BURDEN
interfaces IN:
OUT: Generator output for burden measurement.
A green LED lights up when the output is active.
Equipotential
bonding connector
Mains connection unit
Mains socket with fuse and ON/OFF switch
Figure 2-4: CT SB2 overview
OMICRON
Measurement input for burden measurement.
PRIM
IN: Measurement input for primary
side of the CT.
OUT: Generator output for primary
winding resistance
measurement.
A green LED lights up when the
output is active.
TAPS
Terminals for connection of CT taps X1 to X6.
Connect each CT tap to both sockets!
A green LED lights up to indicate which
input/output is currently active.
CT ANALYZER
Input and output terminals for connection to
the CT Analyzer measurement inputs and
generator output.
LEDs
I/0 Green power LED. Indicates that the CT SB2
is switched on and ready for operation.
Status LED.
Introduction
13