of Remote window
[Lync 2013- Dual Reg] Remote
conversation window recovers
incorrectly after Lync sign out/
sign in
VPN: Addin ending up with one
way Voice path when
Disconnected from network
while in an Active call.
AC for MS Lync 6.4 H.323:
Escalate to Video doesn't work
to Polycom HDX 9k registered
to RV iView Gatekeeper
Alpha AC Lync build 742 |
Installation failure with Error
opening installation file.
Lync 2013|SIP|Lync Integration
goes to Disconnected state
after coming back from sleep
Lync 2013- Add-in Setting
Language display incorrectly
with Dutch
No voice speech path between
H323 dual registration Lync
Integration users when SIP
device answers the second call
from other SIP user
Lync 2010|H323|Computer
Mode: It takes CFWD textbox
long time to disappear after
user resets CFWD
AC-L 6.4.0.7 Release Notes
Avaya Communicator for Microsoft Lync 6.4.0.7
With Dual Registration, after AC-
Lync user decides to sign out and
MSI-7812
terminate all calls then login back
in, hold call window displays
instead of remote call window.
After network recovery, active
call on AC-Lync connects via VPN
will recovery with only 1 way
MSI-7803
voice path. User is failed to hold
the call, get error "Error occurred
while holding call" – cannot end
the call after hold/resume.
AC Lync user cannot escalate to
video in the audio call with
MSI-7621
Polycom HDX 9k registered to RV
iView Gatekeeper or video cannot
be escalated once stopped.
Avaya Communicator for
MSI-7638
Microsoft Lync installation is
failed using the batch file.
After Laptop comes back from
Sleep state, Lync Integration –
MSI-7871
Computer Mode goes to
Disconnected State. User cannot
log in.
Although the language is set to
Dutch, the settings on Avaya
MSI-7866
Communicator for Microsoft Lync
Settings is still displayed in
English.
The call between 2 H323 Dual
Registration Avaya Communicator
for Microsoft Lync users will get
MSI-7874
one way speech patch after SIP
device answers another incoming
call from other SIP.
After being disabled, CFWD
checkbox is still displayed
MSI-7902
unexpectedly for about 4 mins –
user has no way to close it.
None
First Sign-out. Then Close conversation
window by clicking "x" button
None
Install by double clicking msi file and
perform manual setting configuration or
remove the /lx "xxxxx.log" flag in the batch
file.
Open task manager, kill Avaya
Communicator for Microsoft Lync 2013
then Start Lync Integration again.
None
None
None
20