Avaya AC Lync 6.4.0.7 Release Notes page 15

Unable to open IM
conversation for second
contact after minimized it in
shared mode
Citrix 7.11: Same phone
number displayed for all
contacts in Tabbed
conversation.
Citrix 7.11: Active call attached
to IM Conversation window.
SIP-Shared Control Mode:
Conversation does not re-
appear after logout-login while
active audio call
Remote call control bar does
not display and participant
name shows Unknown after
user releases conference call
Video button is not displayed
on IM window after Ending
Remote active Call.
Aura 7.1: ACL crashes in Desk
phone mode while placing call
from Hard phone.
IM conversations are auto
disappeared after changing
mode
Speaker Mute button is not
updated on Video window
After system recovered from
Hibernate addin goes to
disconnected state.
Unable to launch ACL addin on
S4B and Lync 2013,work
around is to repair office.
Cannot call from Outlook to
phone number with other
types than work, home, mobile
or other
S4B dock/undock to screen
bounds doesn't work
ACL call disconnected after
unhold (SFB 2016 basic)
S4B 2016 Basic: After call
extend, call goes on hold.
Mode change from Computer
to Desk phone & vice-versa
sometime fails in ACL client
behind SBC.
AC-L 6.4.0.7 Release Notes
Avaya Communicator for Microsoft Lync 6.4.0.7
The issue does not happen if
MSI-8709 uncheck option "Disable Incoming
call Notification (Phone Mode)"
Same Phone number displayed
MSI-8708 for all contacts in Tabbed
conversation.
Issue only observed in Citrix
MSI-8707
environment.
MSI-8703 User cannot control the active call
User cannot initiate call with the
MSI-8702
user
MSI-8701 User cannot initiate video call
Bad user experience.
MSI-8699
Reproducibility is low.
MSI-8690 Confusing user experience
MSI-8683 Confusing user experience
MSI-8682 Need to connect ACL manually
MSI-8680 ACL cannot launch
User cannot call from Outlook to
MSI-8629 phone number with other types
than work, home, mobile or other
User cannot dock/undock SFB
MSI-8562
window to screen bounds
ACL call disconnected after
MSI-8561
unhold using SFB 2016 basic
After call extended, it goes on
MSI-8556
hold
Mode change from Desk phone to
Computer also fails while ACL is
MSI-8545 registered behind SBC. ACL starts
showing 'mode change in
progress...' for quite a long time.
None
Disable tabbed conversations.
Pop the conversation out
Close conversation widow gives option to
disconnect call.
To end the call user can close conversation
window
None
Use right mouse button menu or reopen
IM conversation with the user.
None
None
Move mouse cursor to speaker button
None
1. Try to change work number to any
other and try to start ACL again.
2. Repair office and reinstall ACL
None
Click to maximize button
None
None
None
15