Avaya AC Lync 6.4.0.7 Release Notes page 18

Lync 2013 | SIP | Bridged Line
Appearances: The video of
other point is closed after
Secretary un-pauses her video
from Add-in
Configurator: Server list
displays incorrectly if we add
more than 2 IP addresses to
Server Address
Lync2013 | H.323 Computer
Mode: H.323 participants can't
see Moderator's video when
joining Lecture-mode
conference
Lync2013 | H.323 | Computer
Mode: Dialed H.323
participant won't see video of
anyone until he un-pauses his
local video
Lync 2010 | Multiple Device
Access Shared mode |
Disconnected State: A second
Lync conversation window
appears when shared control
devices reconnects after
recovering from disconnected
state.
AC for MS Lync 6.4 to Summit
Phone Video call doesn't work
On AC for MS Lync 6.4 Video
doesn't start after unattended
transfer from Summit
AC for MS Lync 6.4 SIP Mode:
Video Screen gets chopped
when dialed into RV MCU
conference
AC-L 6.4.0.7 Release Notes
Avaya Communicator for Microsoft Lync 6.4.0.7
When secretary makes a video
call as the boss and performs a
MSI-7372
pause / un-pause, the video is
stopped on the called party.
When administrator uses the
Configurator to build the Lync
Integration MSI for SIP with
multiple server addresses are
configured, the servers will not be
MSI-7405
configured correctly. Only the
last server entered will have the
correct setting. This results in
Lync Integration being unable to
connect to the other servers.
When Lync 20130 H.323
participant joins the MeetMe
MSI-7406 conf when moderator has already
enabled lecture mode, he cannot
see the moderator's video.
Lync 2013 H.323 joins a Meet-Me
conf as moderator and dials out
to another Lync 2013 H.323 to
MSI-7407 join conference as participant.
When participant joins the Lync
2013 H.323 moderator cannot
see the participant's video.
When in a Multiple Device Access
call with remote call appearance
on Lync add-in and shared device,
if the shared device reconnects
MSI-7568
after recovering from
disconnected state while the call
is still active, a second Lync
conversation window will appear
Lync add-in is not able to see
MSI-7585
video from Summit phone
Cannot start video on Lync add-in
MSI-7591 after transferring call from
Summit phone
When there are more than 2
participants in conference, SIP
MSI-7602
Lync Addin screen is not able to
see video for all participants.
Called party un-pauses video before
secretary performs pause/un-pause
Manually edit the server information in the
Settings panel.
None
Participant un-pauses local video
Close the additional conversation window
manually
None
None
Hit 0 from DTMF to cycle through the
layouts on the RV MCU to pick the layout
preferred
18