Avaya AC Lync 6.4.0.7 Release Notes page 16

Accept Call button is not shown
to ACL User for a forwarded
call. (ACL 6.4.0.4 + Lync 2010)
S4B 2016 Basic: New empty
frame created on call
conversation window.
Call Control bar flickers when
video window keep on top of
call conversation window.
MDA|Lync 2010+2013|All
fields in
DialingRules/Language/Support
are disabled when user closes
remote window on Lync then
ending call on MDA device
Phone Mode|SIP|Lync
2010+Lync 2013| Lync Addin is
not able to switch back
Computer mode after Lync
client loses connection to
shared device
Lync integration H.323 cannot
transfer video call from
Radvision XT240 to Radvision
5000
Lync2013 | H.323 | Phone
Mode | Event Conference:
H.323's video is dropped when
performing TUI command
Citrix XenApp | Call transfer
from device: After call transfer
as soon as we press complete
button on hard-phone, VDI
client get disconnected from
call, but associated Lync client
still remain in active state with
active conversation window
and call duration
AC-L 6.4.0.7 Release Notes
Avaya Communicator for Microsoft Lync 6.4.0.7
User cannot answer the call since
no accept call option available for
MSI-8544
Lync 2010 User for an forwarded
call
Empty frame created at bottom
of ACL bar when user press
MSI-8518
conversation window to
downwards
Control bar option flickers and
MSI-8402 really user found it is very hard to
track and click on any button
When user set up as MDA user,
logs in AC for Lync 2013 on a
laptop and AC for Windows.
When user answers call on AC for
window, then closes remote
MSI-8055
window on Lync and then ending
call on MDA device - all fields on
Settings panel in
DialingRules/Language/Support
tabs are disabled
User is not able to switch back in
Computer mode after Lync client
MSI-8053
loses connection to shared device
when in Phone mode
Users cannot transfer video call
MSI-5686 from Radvision XT240 to
Radvision 5000.
When a Lync 2013 H.323
participant in an Avaya Aura®
MSI-7368 Conference (version 8.0.3) enters
* from the dial pad his video is
dropped.
XenApp: Call transfer from
device: After call transfer as soon
as we press complete button on
hard-phone, VDI client get
MSI-5456 disconnected from call, but
associated Lync client still remain
in active state with active
conversation window and call
duration.
To remove frame, select ACL black bar at
bottom (present on Conversation window)
and press upwards
Move video window to another position
Sign out/sign in back or make or receive a
call
End Addin process from task manager then
restating Addin
None
None
None
16