Avaya AC Lync 6.4.0.7 Release Notes page 19

RV MCU6000: AC for MS Lync
6.4 H.323 Mode: Audio cannot
be escalated to Video
AC for MS Lync 6.4: H.323
Mode sends CM MOH when
hold is pressed in Avaya Aura®
Conferencing 8.0.x conference.
AC for MS Lync 6.4 H.323
Mode: Video doesn't work with
RV MCU 6000 when Video
Codec Level is: 1.0 or 2.3
AC for MS Lync 6.4 SIP Mode:
Video Codec Level 1.0 makes
dial pad to enter passcode
disappear
Lync2013 | SIP Computer
Mode: Unexpected window
appears when answering
incoming call of Avaya Aura®
Conference
AC for MS Lync 6.4 Escalate to
Video doesn't work with
Summit
[Lync 2013 | SIP | H323 |
CS1K:ACE] An error pop-up
appears after set Do Not
Disturb or Ignore from chat
notification
Lync 2010 - H323 - Video
window isn't cleaned up on
Lync Add-in installed some
software
[SPLIT:6.4] Lync2013-H323
Phone Mode: Transferring P2P
call to AAC Conference, Video
takes from 1,5 to 3 mins to
start
Lync2013|H323|BLA with
DS|After Unplug and Plug in
Lan cable| Hold call window
recovered on secretary instead
AC-L 6.4.0.7 Release Notes
Avaya Communicator for Microsoft Lync 6.4.0.7
Lync add-in is not able to escalate
MSI-7603
audio call to video call
All other participants in AAC
conference will hear Music on
MSI-7604 Hold, if Avaya Communicator for
Microsoft Lync H323 user put the
call on hold.
Lync add-in is not able to see
MSI-7609 video when Video Codec level is
1.0 or 2.3
Lync add-in is not able to use dial
MSI-7610
pad
When receiving incoming call
from Avaya Aura® Conference,
MSI-7651 User gets confused with the
unexpected window besides the
active call window with AAC.
Lync add-in is failed to escalate
Video in call with Summit – get
MSI-7589
""Video is not available at this
time"" error.
Receive unexpected error pop-up,
when Avaya Communicator for
MSI-6648 Microsoft Lync user attempts to
set DND or Ignore from IM pop-
up.
When video is dropped, video
window is not cleaned up. It is
still there in grey. Issue seems
only happen with machines have
MSI-5528 some other communicator
software installed (One-X
Communicator, AC Win) and
physical memory ~ 60% , CPU
usage from 20 to 50%
After Lync 2013 – H323 Phone
Mode in active call being
MSI-7537 transferred to AAC Meetme
conference, it takes 1.5 – 3 mins
to have video works.
Remote call window in Secretary
MSI-7793 is changed incorrectly to hold call
window after network recovery.
Initiate video when joining the conference
None
Use different video codec level
Use a different video codec level and
restart Lync add-in
Close the popup manually.
None
Set DND on main windows instead of IM
pop-up.
Drag the mouse to create a region cover
the video window, after that it will
disappear.
Press button to un-pause video after being
transferred, it just takes few seconds to
see Moderator's video.
None
19