Ozito PXBSPS-180 Instruction Manual

Ozito PXBSPS-180 Instruction Manual

Brushless 2-in-1 sander / polisher

Advertisement

Quick Links

BRUSHLESS
2-IN-1
SANDER /
POLISHER
INSTRUCTION MANUAL
SPECIFICATIONS
Input:
18V
No Load Speed:
500-2,800/min
Speed Settings:
7
Disc Diameter:
Ø180mm
Weight:
2.2kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specified
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
STANDARD EQUIPMENT
BRUSHLESS
Brushless 2-in-1 Sander /
Polisher
Hex Key, D Handle, 2 x Handle
Bolts, Side Handle, Spacer &
Hook & Loop Accessory Disc
Foam Application Pad,
Synthetic Polishing Bonnet, 3
x Sandpaper (60, 80, 120grit)
PXBSPS-180
0719

Advertisement

Table of Contents
loading

Summary of Contents for Ozito PXBSPS-180

  • Page 1 Weight: 2.2kg x Sandpaper (60, 80, 120grit) ozito.com.au PXBSPS-180 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 2: Know Your Product

    12. 3 x Sandpaper (60, 80, 120gr) 10. Hex Key 13. Synthetic Polishing Bonnet BATTERY & CHARGER This tool is compatible with all batteries & chargers from the Ozito Power X Change range. ONLINE MANUAL Scan this QR Code with your mobile device to take you to the online manual.
  • Page 3: Attaching Accessories

    2. FITTING THE SECONDARY HANDLES 3. ATTACHING ACCESSORIES WARNING! WARNING! ENSURE THE TOOL IS SWITCHED ENSURE THE TOOL IS SWITCHED OFF AND THE BATTERY IS REMOVED BEFORE OFF AND THE BATTERY IS REMOVED BEFORE PERFORMING ANY OF THE FOLLOWING TASKS. PERFORMING ANY OF THE FOLLOWING TASKS.
  • Page 4: Operation

    OPERATION 4. CONTROLS Sandpaper Selection Turning The Unit On/Off Selecting the correct grit of sandpaper is an important step in achieving 1. To turn the unit on, slide the on/ optimum results. Coarse grit will remove the most material. Finer grit will off switch to the ‘I’...
  • Page 5 You can now move onto the polishing 5. Use a clean terry cloth bonnet (not supplied) for final buffing and polishing process. to achieve a superior finish. PXBSPS-180...
  • Page 6: Using The Sander

    If a problem occurs with the tool, an error code will show on the digital display screen. Refer to the table below for the error code meaning and possible solutions. If the tool still does not start after following the directions below, contact Ozito Customer Service. Forward/ Backwards Error...
  • Page 7: Maintenance

    If the housing of the tool requires cleaning, do not use solvents. Use of a cloth only is recommended. Never immerse any part of the tool into liquid. Note: Ozito Industries will not be responsible for any damage or injuries SPARE PARTS caused by repair of the tool by an unauthorised person or by mishandling.
  • Page 8: Electrical Safety

    Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New risk of fire and electric shock.

Table of Contents