Ozito PXBPS-254 Instruction Manual

Ozito PXBPS-254 Instruction Manual

18v lithium ion buffer polisher

Advertisement

Quick Links

BUFFER
POLISHER
INSTRUCTION MANUAL

SPECIFICATIONS

Input:
18V
No Load Speed:
2,500/min
Pad Diameter:
254mm (10")
Weight:
1.8kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specified
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts, for example; polishing bonnets.
WHAT'S IN THE BOX
Buffer Polisher
Application Bonnet
TOWELLING
(Towelling)
TOWELLING
FLEECE
Polishing Bonnet
(Fleece)
Battery & Charger
sold separately
PXBPS-254
FLEECE
0717

Advertisement

Table of Contents
loading

Summary of Contents for Ozito PXBPS-254

  • Page 1: Specifications

    1.8kg ozito.com.au Battery & Charger sold separately PXBPS-254 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 2: Know Your Product

    FLEECE bonnet over the foam pad. BATTERY & CHARGER (sold separately) This tool is compatible with all batteries and chargers from the Ozito Removing the Bonnet Power X Change Range. 1 Pull one side of the bonnet off the foam pad and then remove.
  • Page 3: Battery And Charging

    2. BATTERY & CHARGING (sold separately) Charging your lithium ion battery - Eco Charger CAUTION: THE CHARGER FOR THIS PRODUCT SHOULD 1 Connect the charger into a mains power outlet. BE PROTECTED BY A RESIDUAL CURRENT DEVICE (RATED AT 30mA OR LESS). 2 The charger LED will flash green showing power is being supplied The purchased battery will be shipped in a low charge condition, and requires charging...
  • Page 4: Operation

    OPERATION 3. BATTERY & CONTROLS 4. USING THE BUFFER POLISHER Inserting the Battery (not included) WARNING! ENSURE HANDS ARE KEPT CLEAR OF MOVING PARTS DURING OPERATION TO AVOID INJURY. THE POLISHING PAD SPINS AT HIGH SPEEDS. 1 Slide the grooves of the battery into the recess at the back of the Before Polishing tool, until it clicks into place.
  • Page 5 CAUTION: Excessive pressure will overload the motor, causing possible damage to the polisher by overheating the motor; or damage to the surface. CAUTION: DO NOT USE WITH ABRASIVE COMPOUNDS AS THIS WILL VOID THE WARRANTY. PXBPS-254...
  • Page 6: Maintenance

    MAINTENANCE TROUBLESHOOTING LED lights do not illuminate on charger WARNING! ALWAYS ENSURE THE TOOL HAS COMPLETELY STOPPED AND THE BATTERY IS Check the charging adaptor is securely plugged into the wall out let. Check the battery is firmly connected to the charging cradle. REMOVED PRIOR TO ANY MAINTENANCE.
  • Page 7: Spare Parts

    This charger is not intended for any uses other than charging rechargeable batteries. Any other use visit www.ozito.com.au or contact Ozito Customer may result in risk of fire, electric shock or electrocution. Service: Do not place any object on top of the charger or place the charger on a soft surface that may result in excessive internal heat.
  • Page 8: Electrical Safety

    When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand.

Table of Contents