Mounting / Removal; Mounting / Removal Of Controller - Panasonic SQ4-C11 Instruction Manual

Mounting / Removal

2-3 Mounting / Removal

2-3-1 Mounting / Removal of Controller

The controller can be mounted on the 35mm width DIN rail.
<Mounting method>
Step 1 Fit the tab on the opposite side of the DIN rail stopper into the 35mm width DIN rail.
Step 2 Press down the tab on the other side against the 35mm width DIN rail to fit it.
<Removing method>
Step 1 Insert a flathead screwdriver to the groove on the DIN rail stopper and pull out the stopper.
Step 2 Push the controller to the other side of the DIN rail stopper.
Step 3 While maintaining the condition in the procedure 2, lift up the controller to remove it.
12
2
2
DIN rail stopper
Take care that if the controller is lifted with the stopper remained inside, the tabs
crack
DIN rail stopper
1
3
35mm width DIN rail
1
Flathead screwdriver
3
1
© Panasonic Industriar Devices SUNX Co., Ltd. 2016