Panasonic SQ4-C11 Instruction Manual page 3

Thank you for purchasing Panasonic Industrial Devices SUNX's controller SQ4-C11 for safety
liquid leak sensor SQ4-A sereis.
Read this instruction manual carefully and thoroughly for the correct and optimum use of this
device.
Kindly keep this manual in a convenient place for quick reference.
This device is a special controller of safety liquid leak sensor SQ4-A sereis.
This manual has been written for the following personnel who have undergone suitable training
and have knowledge of safety liquid leak sensors, as well as, safety systems and standards.
● who are responsible for the introduction of this device
● who design the system using this device
● who install and connect this device
● who manage and operate a plant using this device
Notes
1) All the contents of this instruction manual are the copyright of the publishers, and may
not be reproduced (even extracts) in any form by any electronic or mechanical means
(including photocopying, recording, or information storage and retrieval) without permis-
sion in writing from the publisher.
2) The contents of this instruction manual may be changed without prior notice for further
improvement of the device.
3) Though we have carefully drawn up the contents of this instruction manual, if there are
any aspects that are not clear, or any error that you may notice, please contact our local
Panasonic Industrial Devices SUNX office of the nearest distributor.
4) English and Japanese are original instructions.
© Panasonic Industriar Devices SUNX Co., Ltd. 2016 3