General Information - ASSEMBLAD Infragas-109 Operation And Maintenance Manual

Infragas-109 - Infragas-209 - Infragas-309 - Infragas-205 - Infragas-305 Operation and maintenance manual

1 GENERAL INFORMATION

Please read carefully this manual before use and strictly attain to the following instructions
to carry out measures and maintenance operations.
INFRAGAS-109 / 209 / 309 / 205 / 305 are infrared gas analyzers to measure car and
motorcycle exhaust gas.
Some operation, measure, device or function have an asterisk between brackets (*); this
means that such operation, measure, device or function is available only on certain
models while on others can be an optional.
The technical characteristics and homologations may be referred only on certain models.
Open the equipment only during operation for which it is clearly indicated and after having
switched off the power supply; close the equipment and put it in the original configuration
before switching on again, in particular close and lock the cover.
Take care of the correct tubing and pipe connection, avoid to breath fumes and make sure
they can be dispersed in an open ambient.
The manufacturer decline every responsibility in case of an incorrect use or an use not
expressly specified in this manual; the responsibility is anyhow limited to the equipment's
repair operation with the exclusion of any other direct or indirect damage.
For more information please read the chapter "Warranty condition".
For technical support or spare parts requests please read the chapter "Technical Support"
Due to the continuous technical development of Assemblad equipments, the gas analyzer
could have new functions, or modified functions, than that specified on this manual.
The gas analyzers performs measures in compliance with Italian "D. M. n. 628 of
23/10/1996", and subsequent modifications as for "Circ. n. 88/95 of 6/09/1999".
The gas analyzer performs measures in compliance with Italian "D. M. of 16/01/2000" ,
and subsequent modifications as per "C. d. of M.d.T. of 4/01/2002" and "Circ. 64/404 of
19/01/2005"
The gas analyzer is approved for the communication protocol defined by the technical
specifications MCTCNET version 2.10 dated 24/09/2015 and subsequent integrations.
The gas analysers are homologated for OIML R99, edition 2008, class 00 and for MID
(MI-0.10) n. SK 15 – 044 D.
ASSEMBLAD S.r.l. - 50013 Campi Bisenzio - Firenze - Italia
5
www.assemblad.com - info@assemblad.com