Related Manuals for ASSEMBLAD RPM 111
Summary of Contents for ASSEMBLAD RPM 111
- Page 1 UNIVERSAL COUNTER RPM 111 OPERATING MANUAL Edition: March 2015 - Vers. 1.30 ASSEMBLAD - Technical office - Automotive Division...
-
Page 2: Table Of Contents
5.2 POWER UP OF THE INSTRUMENT ............8 5.3 STANDARD MEASURE ................. 9 6 LCD AND KEYBOARD .................. 10 6.1 LCD DISPLAY ..................... 10 8 WARRANTY ....................11 ASSEMBLAD S.r.l. - 50013 Campi Bisenzio - Firenze - Italy http:// www.assemblad.it - Mail to: info@assemblad.it... -
Page 3: Norms And General Warnings
RPM 111 = Operating manual 1 NORMS AND GENERAL WARNINGS The RPM 111 is an RPM counter device for automotive engines, 2 and 4 strokes from 1 to 20 cylinders. Please read carefully this manual before operating on the equipment and follow the instructions when doing any action on it, in particular when doing maintenance procedures. -
Page 4: Technical Data
DISPLAY - LED - KEYBOARD N. 1 LCD 2 x 16 characters N. 2 LED green and red color. N. 6 Keys. CONNECTIONS USB interface Bluetooth interface ASSEMBLAD S.r.l. - 50013 Campi Bisenzio - Firenze - Italy http:// www.assemblad.it - Mail to: info@assemblad.it... -
Page 5: Description
RPM 111 = Operating manual 3 DESCRIPTION 3.1 UPPER PANEL USB connector Temperature sensor connector 3.2 LOWER PANEL Magnetic sensor and Power supply and antenna connector EOBD connector ASSEMBLAD S.r.l. - 50013 Campi Bisenzio - Firenze - Italy http:// www.assemblad.it - Mail to: info@assemblad.it... - Page 6 RPM 111 = Operating manual 3.3 FRONT PANEL cylinder and stroke. detection mode selection selection Power on Power off led power on led power supply ASSEMBLAD S.r.l. - 50013 Campi Bisenzio - Firenze - Italy http:// www.assemblad.it - Mail to: info@assemblad.it...
-
Page 7: Accessories
Connect cables in equipment to the respective connectors on the instrument. 4.2 POWER UP The RPM 111 has an internal rechargeable battery, this allow to perform measurement without external power supply, it is necessary to connect only the required sensors. -
Page 8: Operation
USB is working. If the communication of data is made via bluetooth, the USB communication is not used. ASSEMBLAD S.r.l. - 50013 Campi Bisenzio - Firenze - Italy http:// www.assemblad.it - Mail to: info@assemblad.it... -
Page 9: Standard Measure
E-OBD interface Connect the interface to the vehicle and to the RPM 111, verify the red led on, turn on the instrument and select the connection with EOBD, if the connection is not detected try to turn off the instrument and after repeat the turn on and selection. -
Page 10: Lcd And Keyboard
DOWN, exit with its selection. Be careful to the use of the selection RESTORE, this delete all instrument data and it restores the default ones. ASSEMBLAD S.r.l. - 50013 Campi Bisenzio - Firenze - Italy http:// www.assemblad.it - Mail to: info@assemblad.it... -
Page 11: Warranty
If the device has such defects as to require technical service, you must return it to Assemblad or an authorized service centre. Shipping charges shall be covered by the customer. ASSEMBLAD, even supplying support on demand for the first installation of the equipment, disclaims any liability for damages and injuries caused, even to third parties, by an improper installation, maintenance, defective or unsafe electrical connections. - Page 12 Tel. +39 055 890485 Fax +39 055 890496 http:// www.assemblad.it E-Mail: info@assemblad.it Reproduction and/or disclosure prohibited 2014/30/UE 2014/35/UE EN 61010-1 EN 61326-1 are Registered Trademark ASSEMBLAD S.r.l. - 50013 Campi Bisenzio - Firenze - Italy http:// www.assemblad.it - Mail to: info@assemblad.it...
Need help?
Do you have a question about the RPM 111 and is the answer not in the manual?
Questions and answers