Advertisement
PRECAUTIONS:
Please read before you start the installation.
Please study these instructions carefully before installing
AXXESS.i plug and play wiring harness.
Many new vehicles use low-voltage or data-bus systems that
can be damaged by test lights and logic probes. Test all
circuits with a digital multi-meter before making connections.
Do not disconnect the battery if the vehicle has an anti-theft-
coded radio, unless you have the radio code.
If installing an external push button switch, check with the
customer about where to install the switch.
To avoid accidental battery drainage turn off the interior
lights or remove the dome light fuse.
Roll down a window to avoid being locked out of the car.
Use of this product in a manner different to its intended way
of operation may result in property damage, personal injury,
or death.
Set Parking brake.
Remove the negative battery cable.
Protect fenders before starting.
Using protective blankets to cover front seats, interior of the
vehicle and center console.
Always install a fuse 6-12 inches away from AXXESS.i
interface, 5 amp fuse should be used.
Always secure AXXESS.i interface with Velcro or double side
tape to prevent rattling of the interface.
When securing AXXESS.i interface make sure that panels can
be closed back easily.
Use electrical tape on all you connections and splices, do not
leave any exposed connections.
Route all wires along factory harnesses, try not to drill or
make any unnecessary holes.
Make sure you are not connecting to any data wires; always
check your connections with a multi-meter.
Always use help of a professional installer to prevent any
damage to the vehicle or AXXESS.i interface.
4
Advertisement
