Advertisement
Quick Links
APPLICATIONS
Visit axxessinterfaces.com for current application list
AxxessInterfaces.com
Ford DSP Interface With Pre-Wired Harness
2014-Up
INTERFACE FEATURES
• Includes a DSP (Digital Signal Processor)
• 31 Band graphic EQ
• 10 individually assignable outputs
• Independent equalization on each of the 10 outputs
• Independent high pass, low pass, and bandpass filters
• Each channel can be delayed independently up to 10ms
• Clipping detection and limiting circuits
• Retains SYNC® voice prompts
• Adjustable chime level
• Can be used in amplified and non-amplified models
• Easy behind the radio installation with pre-wired harness
• Bass knob included for level control of subwoofer amp
• Settings adjusted via Bluetooth
in a smart device application (tablet
®
or mobile phone), compatible with both Android and Apple devices
• Read, write, and store configurations for future recall
• Password protect feature available in the mobile app
• Micro-B USB updatable
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
AXDSPX-FD2
I N S T A L L A T I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Installation Options ...............................................2
Installation .............................................................2
Connections ........................................................ 3-4
Mobile App ........................................................ 5-13
Specifications ....................................................... 14
INTERFACE COMPONENTS
• AXDSPX-FD2 interface
• AXDSPX-FD2 interface harness
• AXDSPX-FD2 vehicle T-harness • Bass knob
• AXDSPX-FD2 display T-harness
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties • Multimeter
Apple App Store
Google Play Store
iOS 12.1 or higher
REV. 7/30/20 INSTAXDSPX-FD2
Advertisement
Related Manuals for Axxess AXDSPX-FD2
Summary of Contents for Axxess AXDSPX-FD2
-
Page 1: Table Of Contents
• Independent equalization on each of the 10 outputs • AXDSPX-FD2 interface harness • Independent high pass, low pass, and bandpass filters • AXDSPX-FD2 vehicle T-harness • Bass knob • Each channel can be delayed independently up to 10ms • AXDSPX-FD2 display T-harness •... -
Page 2: Installation Options
† For amplified models the amp must be bypassed/unplugged, and With OE Amplifier chosen in the Configuration tab under Vehicle Type. Use Axxess AXABH-FD1 (sold separately) to bypass the 6. Download and install the AXDSP-X app from the Google Play Store or Apple App Store. amp for best results. -
Page 3: Connections
ADDING A SUB TO A FACTORY SYSTEM Bass Knob Black - Ground Factory Radio Chassis Orange - Control Factory Display Screen Any remaining wires tape off and disregard Factory Radio Harness Display T-Harness Factory Display Harness * NAV models only * Connect (2) Wires * NAV models only * Vehicle T-Harness... - Page 4 ADDING A FULL-RANGE AMP & SUB TO A FACTORY SYSTEM Bass Knob Black - Ground RCA Jacks Orange - Control Factory Radio Chassis (sold separately) Factory Amp Factory Display Screen If equipped, bypass and remove Display T-Harness Any remaining wires * NAV models only * Factory Display Harness tape off and disregard...
-
Page 5: Mobile App
MOBILE APP Setup Instructions • General information tab for installing the interface. Continued on the next page REV. 7/30/2020 INSTAXDSPX-FD2... - Page 6 MOBILE APP (CONT.) Bluetooth Connection • Scan - Press this button to start the Bluetooth pairing process, then select the interface • Disconnect - Disconnects the interface from the app. once it is found. “Connected” will appear in the top left corner of the app once paired. Note: The ignition must be cycled on during this process.
- Page 7 MOBILE APP (CONT.) Configuration • Identify - Click this button to send a test tone to the front left speaker*. • Save Configuration - Saves the current configuration to the mobile device. • Recall Configuration - Recalls a configuration from the mobile device. * Only installations using the front left output (white RCA jack).
- Page 8 MOBILE APP (CONT.) Outputs Output Channels • Location - Location of speaker. • Invert - Will invert the phase of the speaker. • Group - Used to join channels together for simple equalization. Example, left • Mute - Will mute desired channel(s) for tuning individual channels. front woofer/midrange and left front tweeter will be considered simply left front.
- Page 9 MOBILE APP (CONT.) Crossover Adjust • If installing a subwoofer, the front and rear outputs will default to a 100Hz high pass filter to keep the low frequency signals out. If a subwoofer is not being installed, change the front and rear crossover points down to 20Hz for a full range signal, or to the lowest frequency the speakers will play down to.
- Page 10 MOBILE APP (CONT.) Equalizer Adjust • All channels can be adjusted independently within this tab with 31 bands of available equalization. It is best to tune this by using an RTA (Real Time Analyzer). • The Gain slider on the far left is for the channel selected. Continued on the next page...
- Page 11 MOBILE APP (CONT.) Delay Adjust • Allows a delay of each channel. If a delay is desired, first measure the distance (in inches) from each speaker to the listening position, then enter those values to the corresponding speaker. Add (in inches) to the desired speaker to delay it.
- Page 12 MOBILE APP (CONT.) Inputs/Levels • Chime Volume - Allows the chime volume to be adjusted up or down. • Amp Turn On • Signal Sense - Will turn the amp(s) on when an audio signal is detected, and keep on for Note: Chimes will be heard through the gauge cluster once the factory amp is removed. 10 seconds after the last signal.
- Page 13 MOBILE APP (CONT.) Locking Down Data Last and the most important. You must lock down your configuration and cycle the key!!! REV. 7/30/2020 INSTAXDSPX-FD2...
-
Page 14: Specifications
SPECIFICATIONS Input Impedance 1M Ohm Operating Voltage 10-16 volts DC Input Channels Standby Current Draw Input Options High Level or Low Level Operation Current Draw 150mA Input Type Differential balanced Adjustments/Controls Application via Bluetooth Input Voltage 0 - 28-volts (peak-to-peak) Remote Output 12 volts DC (signal sense (high level range) - Page 15 REV. 7/30/2020 INSTAXDSPX-FD2...
- Page 16 AXDSPX-FD2 I N S T A L L A T I O N I N S T R U C T I O N S Having difficulties? We’re here to help. Contact our Tech Support line at: 386-257-1187 Or via email at: techsupport@metra-autosound.com...