Axxess AXi-MBEIRC-R Installation Manual page 10

STEP 6: CONNECTING HARNESS TO THE RADIO.
Carefully route the cable inside the radio and avoid obstruction of CD changer
connector.
ATTENTION: Keep the area marked in red accessible.
This space will be required for installing the ribbon cable in step 7.
Pic 7
STEP 7: RECONNECTING CABLES AND CLOSING RADIO.
Connect AXi-MBEIRC-R harness to AXi-MBEIRC board as shown.
Reconnect the ribbon cable from the CD changer to the radio and close the
cover.
Replace two screws from top of the radio.
Pic 8
10