4. Remove the battery (C) and the foam sheet (D).
5. Install in the opposite sequence. Make sure that you
put the battery cable as shown in the illustration.
20 - Repair instructions
7.11 The push button adapter
7.11.1 To remove and install the push button
adapter
1. Disassemble the right earmuff. Refer to
disassemble the right earmuff on page 11 .
C
2. Remove the push button adapter (A).
D
3. Install in the opposite sequence.
7.12 The wind screen
7.12.1 To remove and install the wind screen
1. Remove the O-ring (A).
2. Remove the wind screen (B) from the boom
microphone (C).
3. Install in the opposite sequence.
To
A
A
B
C
893 - 001 -