Prepare And Do Servicing On The Product; Life Cycle And Discharge Of The Battery; To Replace The Hygiene Kit; To Remove And Install The Boom Microphone - Husqvarna X-COM R Workshop Manual

Hide thumbs Also See for X-COM R:
Table of Contents

Advertisement

3 Prepare and do servicing on the product

3.1 Life cycle and discharge of the battery

During long-term storage, charge the battery at an
interval of 6 months to prevent discharge of the battery.
Discharge can decrease the life cycle of the battery.

3.2 To replace the hygiene kit

The hygiene kit must be replaced when necessary or
minimum with a 6 months interval. Use the correct
hygiene kit from Husqvarna .
1. Remove the sealing ring (A) and foam rubber insert
(B).
B
2. Install the new foam rubber insert and the new
sealing ring. Make sure that the bulge (C) is in the
correct position.
893 - 001 -
A
C
3. Make sure that the foam rubber insert is installed as
shown (D).
3.3 To remove and install the boom
microphone
The boom microphone can make sound quality better in
phone calls in an environment with noise.
1. Pull out the boom microphone from the microphone
input.
2. Install in the opposite sequence
Prepare and do servicing on the product - 5
D

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents