Husqvarna X-COM R Workshop Manual page 13

7.4.3 To assemble the right earmuff
1. Connect the connectors for the strain relief cable
(G), microphone (H), microphone connector (I) and
loudspeaker (J).
A
D
2. Install the circuit board (E) with the 4 screws (F).
G
3. Install the strain relief (G) and the microphone
connector (H).
893 - 001 -
4. Install the inner earmuff (I) with the 4 screws.
B
C
F
5. Install the foam rubber insert (J) and attach the
sealing ring (K).
H
E
6. Attach the earmuff to the headband. Refer to
remove and install the headband on page 10 .
J
Repair instructions - 13
I
K
To