Husqvarna X-COM R Workshop Manual page 12

8. Disconnect the connectors for the strain relief (G),
the microphone (H), the microphone connector (I)
and the loudspeaker (J).
G
J
7.4.2 To disassemble the left earmuff
CAUTION: Be careful when you do work on the
wires. The wires can easily be damaged.
1. Make a note of how the cables and components are
installed when you disassemble the earmuff.
2. Remove the earmuff from the headband. Refer to
remove and install the headband on page 10 .
3. Remove the hygiene kit. Refer to
hygiene kit on page 5 .
4. Remove the 4 screws (A) and the inner earmuff (B).
12 - Repair instructions
5. Loosen the strain relief (C) and the DC connector
H
6. Disconnect the connectors for the strain relief cable
I
To
To replace the
A
B
(D).
C
(E), the loudspeaker (F), the microphone (G), the
power connector (H) and the battery (I).
E
D
F
G
H
I
893 - 001 -