Lan Settings Screen - Huawei B2368 Series User Manual

LTE CPE B2368 User's
Guide
DHCP
DHCP (Dynamic Host Configuration Protocol) allocates client devices over a network connection TCP / IP.
LTE modem has a built-in DHCP server, which supported client device assigns IP addresses and DNS Server.
DNS
DNS (Domain Name System) is a hierarchical domain name system mapping the domain name to the corresponding IP
address and vice versa. The DNS server is extremely important because without it having to remember the IP address of
each computer to which you want to connect. DNS server addresses are assigned to a client device automatically, along
with the IP address and subnet mask DHCP server.
6.1.1.2 The UPnP
How do I use the UPnP device?
UPnP device appears as an icon when you open the View menu computers and devices on the network in Control Panel
(Windows 10). Each UPnP devices on your network in this menu will appear separately. Double click the icon to see more
information about UPnP device and its properties.
Notice regarding the UPnP device
Devices and applications that perform automated network address translation (NAT), at the same time tend to have
access to the ports of the firewall, which can pose a security risk. Through these devices and applications can also in
some cases to obtain information about network security.
Once connected to the network UPnP devices, announces its presence with a multicast message. For safety
reasons, the LTE modem allows multicast messages only on the local network.
All UPnP devices within a network among themselves so they can communicate freely without the need for further
adjustment. UPnP can be switched off if these devices do not use.

6.2 LAN Settings screen

Enter the screen LAN settings click on Network Settings> Home network. Use this screen to configure the IP Enter the screen LAN settings click on Network Settings> Home network. Use this screen to configure the IP Enter the screen LAN settings click on Network Settings> Home network. Use this screen to configure the IP Enter the screen LAN settings click on Network Settings> Home network. Use this screen to configure the IP Enter the screen LAN settings click on Network Settings> Home network. Use this screen to configure the IP
address of the local network subnet mask LTE modem parameters DHCP server parameters IP addressing and
DNS values.
Issue 01 Copyright © Huawei Technologies Co., Ltd.
6 Setting up a home network
55