To remove E220, use the hardware deleting
function of the Windows system to stop E220
and then pull it out.
Double-click
1)
of the desktop; the "Safely Remove
Hardware" prompt will be displayed.
Stop the E220 hardware "USB Mass
2)
Storage Device".
At the prompt, pull E220 out.
3)
Introduction to the E220
Manager Interface
1.
Accessing the E220
Manager Interface
Double-click
E220 Manager.
If the system prompts you to enter a PIN, enter
the correct one.
2.
Introduction to the Icons
/
: Connect/Disconnect the network
connection.
: Open the default browser of the OS.
on the status area
on the desktop to start the
: Access the SMS window.
: Access the contacts window.
Internet Service
1.
Network Connection
Settings
To create a new profile:
Select Settings > Network
1)
Connection Settings.
Click New.
2)
Enter the profile name and the
3)
parameters.
Click Save.
4)
Note: For the detailed parameters, consult the
local network operator.
2.
Connecting to the Internet
Click
1)
network.
When the connection is created, the current
connection information will be displayed on the
right pane of the window, including connect
duration, data volumes, received and sent
volumes, rate and the top rate.
3
to connect to the