Huawei B2368 Series User Manual page 105

LTE CPE B2368 User's
Guide
Figure 14-2 Add new tunnel / tunnel Modifications Figure 14-2 Add new tunnel / tunnel Modifications
The following table summarizes the available fields on this screen.
Table 14-2 Add new tunnel / tunnel Modifications Table 14-2 Add new tunnel / tunnel Modifications
Item
GRE settings
Allowed
name of tunnel
GRE layer
Server IP Address This is the IP address or domain name of the remote gateway to which WAN
Issue 01
Description
Check the box to activate the GRE tunnel.
Leave the box unchecked if you do not currently use the tunnel.
Enter a descriptive name for the GRE tunnel.
This field specifies which layer of the OSI reference model will GRE tunnel reside ( layer2 This field specifies which layer of the OSI reference model will GRE tunnel reside ( layer2
GRE or Layer3 GRE). Use a second layer if the IP addresses of both computers on GRE or Layer3 GRE). Use a second layer if the IP addresses of both computers on GRE or Layer3 GRE). Use a second layer if the IP addresses of both computers on GRE or Layer3 GRE). Use a second layer if the IP addresses of both computers on
the LAN from the same subnet domain. Use a third layer, if the IP addresses of both
computers on the LAN subnet in different domains.
LTE modem interface tunnel stream.
Copyright © Huawei Technologies Co., Ltd.
14 GRE VPN
102