Screen More Ap - Huawei B2368 Series User Manual

LTE CPE B2368 User's
Guide
Item
encryption

5.3 Screen More AP

LTE modem is able to transmit up to four independent wireless network simultaneously. This means that users
can connect to LTE modem through different SSIDs. Connection to each SSID profile can be secured, so that
the wireless client devices connected to different SSID identifiers between themselves they can not
communicate.
Use this screen to enable and configure additional wireless network infrastructure.
Click on Network Settings> WiFi 2.4 GHz / 5 GHz WiFi> More AP. The following screen will appear. Click on Network Settings> WiFi 2.4 GHz / 5 GHz WiFi> More AP. The following screen will appear. Click on Network Settings> WiFi 2.4 GHz / 5 GHz WiFi> More AP. The following screen will appear.
Figure 5-6 Network Settings> WiFi 2.4 GHz / 5 GHz WiFi> More AP Figure 5-6 Network Settings> WiFi 2.4 GHz / 5 GHz WiFi> More AP
The following table summarizes the available fields on this screen.
Table 5-4 Network Settings> WiFi 2.4 GHz / 5 GHz WiFi> More AP Table 5-4 Network Settings> WiFi 2.4 GHz / 5 GHz WiFi> More AP
Item
#
Active
SSID
Issue 01
Description
only WPA-PSK connect to the LTE modem. The LTE modem supports only WPA-PSK connect to the LTE modem. The LTE modem supports only WPA-PSK connect to the LTE modem. The LTE modem supports
WPA-PSK and WPA2-PSK simultaneously.
If the security mode is set to WPA-PSK, Encryption will be automatically set to TKIP, So If the security mode is set to WPA-PSK, Encryption will be automatically set to TKIP, So If the security mode is set to WPA-PSK, Encryption will be automatically set to TKIP, So If the security mode is set to WPA-PSK, Encryption will be automatically set to TKIP, So If the security mode is set to WPA-PSK, Encryption will be automatically set to TKIP, So
on the temporal key integrity protocol (TKIP Temporal Key Integrity Protocol). If the
security mode is set to WPA2-PSK and setting security mode is set to WPA2-PSK and setting security mode is set to WPA2-PSK and setting
WPA-PSK Compatible is disabled, the encryption will be automatically set to AES, WPA-PSK Compatible is disabled, the encryption will be automatically set to AES, WPA-PSK Compatible is disabled, the encryption will be automatically set to AES,
Thus, system advanced encryption AES (Advanced Encryption System). AES
system offers significantly better security than TKIP. If the security mode is set
to WPA2-PSK and setting to WPA2-PSK and setting to WPA2-PSK and setting
WPA-PSK Compatible is enabled, encryption is automatically set to TKIPAES, Thus, WPA-PSK Compatible is enabled, encryption is automatically set to TKIPAES, Thus, WPA-PSK Compatible is enabled, encryption is automatically set to TKIPAES, Thus, WPA-PSK Compatible is enabled, encryption is automatically set to TKIPAES, Thus,
the system AES and TKIP will be active simultaneously.
Description
This is the serial number.
This field shows whether the corresponding SSID is active. Symbol yellow light bulb means
that the SSID is active. Symbol gray bulb means that the SSID is not active.
SSID profile is a set of parameters related to one of the wireless networks LTE modem. The
name of the wireless network's SSID (Service Set Identity) is used as an identifier for the
wireless client devices.
Copyright © Huawei Technologies Co., Ltd.
5 Wireless WiFi 2.4 / 5 GHz
41