Configuration Example L2Tp Vpn Tunnel Layer 2 - Huawei B2368 Series User Manual

LTE CPE B2368 User's
Guide
Example static routing network is set to the IP address 192.168.2.0/24 through the tunnel (gateway IP
address: 192.168.3.2).
Figure 13-6 Example configuration L2TP VPN tunnel Layer 3 static routing Add new Figure 13-6 Example configuration L2TP VPN tunnel Layer 3 static routing Add new

5.13 Configuration Example L2TP VPN tunnel Layer 2

This is a diagram of a network structure in the example below:
Figure 13-7 An example of the network structure of the VPN tunnel L2TP Layer 2 Figure 13-7 An example of the network structure of the VPN tunnel L2TP Layer 2
A CPE WAN IP is 10.10.50.205, which is to the LAN connected to a computer with an IP address
192.168.1.58. In addition, BCP L2TP server WAN IP 172.16.9.3, which is connected to the LAN computer with
the IP address 192.168.1.214. IP addresses of both computers on the LAN must come from the same domain
subnet. L2TP VPN tunnel Layer 2 can be set using the web configuration screen L2TP VPN. subnet. L2TP VPN tunnel Layer 2 can be set using the web configuration screen L2TP VPN.
Issue 01 Copyright © Huawei Technologies Co., Ltd.
13 L2TP VPN
98