Huawei B2368 Series User Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Modem
  5. B2368
  6. User manual

Huawei B2368 Series User Manual

Lte cpe
Hide thumbs Also See for B2368 Series:
Table of Contents

Advertisement

Quick Links

LTE CPE B2368
User Manual
Date
03/31/2018
HUAWEI TECHNOLOGIES CO., LTD.

Advertisement

Table of Contents
loading

Related Manuals for Huawei B2368 Series

Summary of Contents for Huawei B2368 Series

  • Page 1 LTE CPE B2368 User Manual Date 03/31/2018 HUAWEI TECHNOLOGIES CO., LTD.
  • Page 2 Copyright © Huawei Technologies Co., Ltd. 2018. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means without the prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other symbols and inscriptions Huawei are trademarks of Huawei Technologies Co., Ltd.

  • Page 3: About This Document

    IDU indoor unit. The LTE modem is a complete security solution simultaneously containing reliable firewall operating on the principle stateful packet inspection (SPI) and denial of service (Denial of Service, DoS). Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 4: Table Of Contents

    4 Broadband ...................... 27 4.1 Overview ..................................27 Screen 4.2 Broadband ........................27 4.2.1 Edit WAN interfaces ............................. 28 4.3 Screen SIM ................................30 Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 5 ALG Screen 8.5 ................................72 8.6 Technical details ..............................72 8.6.1 Basic definitions NAT ......................... 73 8.6.2 What happens during NAT ..........................73 Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 6 14.2.1 Screen Add new tunnel / tunnel Modification ....................101 3.14 Configuration Example GRE VPN tunnel Layer 2 ....................103 4.14 Configuration Example GRE VPN tunnel layer 3 ....................104 VoIP ..........15 ................... 106 Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 7 20.2 Settings screen time ............................143 Setting logging ..........21 ..............146 21.1 Overview ..................................146 21.2 Settings screen logging ..........................146 Upgrade software ..........22 ..............148 Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 8 27.4 Internet access ..............................170 27.5 Wireless Internet access ..........................170 27.6 Telephone calls and VoIP ............................171 27.7 UPnP ..................................172 28 Privacy ......................173 Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 9: Use Lte Modem

    Figure 1-1 Diagram of Internet access via LTE modem 1.1.2 VoIP telephony A single user account can be assigned to one profile SIP (Session Initiation Protocol) and use such LTE modem as a device for VoIP phone calls: Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 10: Wireless

    Press WPS on the back of the modem (internal unit) can wireless 2.4 GHz and 5 GHz bands on and off. The button can also be used to activate WPS, allowing you to quickly configure the wireless network with strong security. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 11: Methods For Administration Lte Modem

    LTE modem. Simply load the latest configuration file. Keep in mind, however, that the configuration file does not store account passwords VoIP telephony. Write down and keep safe all the information that you transmit your Internet Service Provider. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 12: Parts Of Equipment

    Powerful LTE Signal: SINR ≥ 10 db blue steady on Moderate LTE signal: 10 db> SINR ≥ 4 db Moderate LTE signal: 10 db> SINR ≥ 4 db Moderate LTE signal: 10 db> SINR ≥ 4 db Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 13: Indoor Unit

    1.5.2 Indoor unit The following picture is a diagram LED indicators and their labels. Figure 1-5 The front panel of the indoor unit Figure 1-5 The front panel of the indoor unit Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 14 The telephone jack is assigned SIP account, which was delivered to the Yellow Shines voice message. The phone jack is connected to the phone and posted to the Flashing account SIP voice message was delivered. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 15: Reset Button

    If you forget the password to the Web-based interface, you can use the RESET on the back of the modem reset the default configuration file. This means that all settings will be lost and password for the web interface are reset to default. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 16: Introduction To Web Configuration Interface

    Step 1 Go to Start> Control Panel> Network Center and Sharing. step 2 Click on the name of the network to which you have access. step 2 Click on the name of the network to which you have access. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 17 4 mouse to select Internet Protocol Version 4 (TCP / IPv4) and then click on Properties. step 4 mouse to select Internet Protocol Version 4 (TCP / IPv4) and then click on Properties. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 18 OK. then Close and in the next window again Close. Figure 2-4 Properties of Internet Protocol Version 4 (TCP / IPv4) Figure 2-4 Properties of Internet Protocol Version 4 (TCP / IPv4) - - - - End Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 19: Access To Web Configuration Interface

    Figure 2-6 Notification of blocked logging NOTE For security reasons, the configuration interface will automatically be logged off after five minutes of inactivity (by default). If this happens, simply log in again. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 20: Layout Configuration Interface

    Click on Connection Status> System Information to display the following screen. (For more information Click on Connection Status> System Information to display the following screen. (For more information see 3.3 Display Information System). Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 21: Top Panel

    Device Management> Manage Account You can set passwords for each user account. For more information, see 18 user account. 2.2.4 Navigation Bar The navigation pane contains individual parts of menus that allow you to set the relevant functions of an LTE modem. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 22: Connection Status And System Information

    Display Mode. Use the drop-down menu recovery interval You can set how often you want to update this Display Mode. Use the drop-down menu recovery interval You can set how often you want to update this screen. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 23: Display Information System

    At display mode - list you'll see information about the client device directly. 3.3 Display Information System Click on Connection Status> System Information for this screen. Click on Connection Status> System Information for this screen. Click on Connection Status> System Information for this screen. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 24 LTE CPE B2368 User's Guide 3 connection status and system information Figure 3-4 Screen System Information Figure 3-4 Screen System Information Individual fields are described in the following table. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 25 This is the channel number on which currently LTE modem transmits wireless network. Channel is configured appears when the LTE modem is configured appears when the LTE modem WPS status connected to a wireless client device, or if WPS is active and Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 26 PIN required or PUK required. In this field the signal strength LTE network by modem receives from the transmitter or signal strength base station (sometimes referred to as an eNodeB or eNB). Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 27 For WLAN is shown in this field the maximum transfer rate or Not available if the wireless is disabled. system status runtime In this field the runtime LTE modem, from the last Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 28 Idle, if the SIP account has not yet been registered. ready for use, or Idle, if the SIP account has not yet been registered. ready for use, or Idle, if the SIP account has not yet been registered. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 29 In this field, the account number and account SIP service domain. The values ​ ​ c an be changed through the menu VoIP> SIP> SIP account. changed through the menu VoIP> SIP> SIP account. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 30: Broadband

    Figure 4-1 Network Settings> Broadband> Broadband Figure 4-1 Network Settings> Broadband> Broadband The following table summarizes the available fields on this screen. Table 4-1 Network Settings> Broadband> Broadband Table 4-1 Network Settings> Broadband> Broadband Item Description Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 31: Edit Wan Interfaces

    Click on the icon adjust for a front display a dialog box, as shown in the following figure. Click on the icon adjust for a front display a dialog box, as shown in the following figure. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 32 Select Dynamic to assign IP addresses ISP via DHCP leases 5 minutes. Select Static Select Dynamic to assign IP addresses ISP via DHCP leases 5 minutes. Select Static Through for assigning IP addresses via DHCP ISP only devices with specific MAC Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 33: Screen Sim

    SIM error - LTE modem does not recognize any SIM card inserted. SIM error - LTE modem does not recognize any SIM card inserted. SIM error - LTE modem does not recognize any SIM card inserted. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 34: Screen Blocked

    NOTICE However, if you enter the wrong PUK code several times, the SIM card is discarded. Figure 4-4 Network Settings> Broadband> SIM: Card blocked Figure 4-4 Network Settings> Broadband> SIM: Card blocked Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 35 Remaining attempts Remaining number of attempts to enter the correct PUK code before permanent depreciation SIM card. Click to save the changes made in this section. Click to restore previous settings in this section. Cancel Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 36: Wireless Wifi 2.4 / 5 Ghz

    The second type of network " ad hoc " in which there are no access points. Wireless client devices • connect to each other and exchange information. The following image is an example of a wireless network. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 37 This allows the same place, there were many wireless networks without interference. When networking you must select the channel you want to use. Given that unlicensed spectrum available in each country are different, so the number of available channels. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 38: Before

    In general Click to enter Network Settings> WiFi 2.4 GHz / 5 GHz WiFi. Screenshots describe network setup WiFi 2.4 GHz. 5GHz network settings screen look and function similarly. All display settings check box Enable WiFi. check box Enable WiFi. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 39 LTE CPE B2368 User's Guide 5 Wireless WiFi 2.4 / 5 GHz Figure 5-2 Network Settings> WiFi 2.4 GHz> General Figure 5-2 Network Settings> WiFi 2.4 GHz> General Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 40 Enabling this feature prevents the individual client devices communicate with Insulation each other through the router. Check this box to hide the network identifier in the outgoing beacon frame. Hide SSID Wireless will be for other devices Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 41 Car, when that is automatically selected. If you encounter problems with wireless interference, changing channels can help. Select a channel number, which is the farthest possible from channels that Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 42 Table 5-2 WiFi 2.4 / 5 GHz> General: No security Table 5-2 WiFi 2.4 / 5 GHz> General: No security Item Description security level Move the slider to choose Without security. Move the slider to choose Without security. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 43: Higher Security (Wpa (2) Psk)

    This field will be displayed when you select WPA2-PSK like Security mode. This field will be displayed when you select WPA2-PSK like Security mode. Compatible Enable this setting if you want to enable devices supporting Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 44: Screen More Ap

    SSID profile is a set of parameters related to one of the wireless networks LTE modem. The name of the wireless network's SSID (Service Set Identity) is used as an identifier for the wireless client devices. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 45: Editing Multiple Ap

    Using this screen, you can edit the SSID profile. Click on the icon adjust at the appropriate SSID profile screen More AP. The following screen will appear. AP. The following screen will appear. Figure 5-7 WiFi 2.4 GHz> More AP: Edit Figure 5-7 WiFi 2.4 GHz> More AP: Edit Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 46 You can also select No security - in which case appears on the screen next setting. You can also select No security - in which case This wireless network will be able to connect any device without any Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 47: Wps Screen

    Figure 5-9 Network Settings> WiFi 2.4 GHz / 5 GHz WiFi> WPS Figure 5-9 Network Settings> WiFi 2.4 GHz / 5 GHz WiFi> WPS The following table summarizes the available fields on this screen. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 48: Technical Details

    Second, encrypted wireless communication. This means that the information sent by air are in a readable format - They are encoded. Only a person possessing the relevant key data they are able to read, and this key will get only persons authenticated credentials. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 49 Second Hexadecimal characters refers to the number 0 - 9, the letters A - F aa - F. Second Hexadecimal characters refers to the number 0 - 9, the letters A - F aa - F. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 50 Most methods of encryption to protect information sent by the wireless network key. The longer the key, the stronger the security. Each device on the wireless network must be accessed using the same key. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 51: Problems With The Signal

    Function MBSSID (Multiple Basic Service Set IDentifier) ​ ​ o f the LTE modem enables use of a single access point to provide some Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 52: Connecting Using Wifi Protected Setup (Wps)

    3 Press on one of the devices (in any order). WPS button of LTE step 3 Press on one of the devices (in any order). WPS button of LTE a modem is required to press and hold at least 10 seconds. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 53 If an Internet connection is not available, refer to the configuration interface of the access point (AP). If you see the list of wireless client devices connected via WPS was successful. The following figure shows a wireless client device (laptop) that connects to the access point (AP) by entering a PIN. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 54 If there is still no network, will generate a random password, SSID and WPA (2) PSK. The following figure shows a wireless client device (laptop) that connects to the access point (AP). Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 55 WPS works only with properly equipped facilities. A network that was created using WPS, though it is of • course possible to later add devices that support this feature. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 56 MAC addresses of client devices in your home (usually on a label on the bottom of the device). If the list in the configuration interface, you can find an unknown MAC address, you can be deleted from the list. An alternative solution is to restart the access point. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 57: Setting Up A Home Network

    The subnet mask specifies an IP address belonging to segment the network. LTE modem calculate subnet mask automatically based on your specified IP addresses. Subnet mask computed LTE modem does not need to be changed if the instructions say otherwise. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 58: Lan Settings Screen

    Enter the screen LAN settings click on Network Settings> Home network. Use this screen to configure the IP address of the local network subnet mask LTE modem parameters DHCP server parameters IP addressing and DNS values. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 59 Enter the subnet mask in standard decimal, for example. mask 255.255.255.0 (the default setting). LTE modem calculate subnet mask automatically based on your specified IP addresses. Subnet mask computed LTE modem does not need to be changed if Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 60 IP address of the DHCP server. Choose Prohibit if you do not have the IP address of the DHCP server. If you use DHCP relay is enabled, it is necessary to set Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 61: Static Dhcp Screen

    (static lease) This is the serial number. In this field there is information on whether the device is connected to LTE modem. State Name This field is the hostname of the client device. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 62 Description MAC Address Enter the MAC address of the device you want to add. Enter the IP address you want the device with the MAC address on the network assigned. IP address Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 63: Upnp Screen

    Click on network settings > Home Network > UPnP list. Click on network settings > Home Network > UPnP list. Click on network settings > Home Network > UPnP list. Click on network settings > Home Network > UPnP list. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 64 Internal (LAN) port that LTE modem assigned to the application. Restore Clicking Restore make reload the table. Clicking Restore make reload the table. Clicking Restore make reload the table. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 65: Static Routing 7

    - R3. separate communication networks for a router connected to the local network - R3. Figure 7-1 Example static routing topology Figure 7-1 Example static routing topology Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 66: Configuration Of Static Routing

    Click on the icon adjust open the dialog for the relevant static routing. Click on the icon Remove remove the static routing. the icon Remove remove the static routing. the icon Remove remove the static routing. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 67: Add / Edit Static Routing

    You can specify whether you want to direct packets to IP gateway or a particular interface. If you want to use a specific interface, select the field from the drop down list, select the interface over which you want to direct the flow of data. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 68 Clicking Use save your changes. Clicking Use save your changes. Clicking Use save your changes. Clicking back to exit without saving. Clicking back to exit without saving. Clicking back to exit without saving. back Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 69: Network Address Translation (Nat)

    NAT entire internal network from the outside as a single computer. More information A more detailed description of the NAT technology is contained in chapter 8.6 Technical details. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 70: Screen Port Forwarding

    Enter the screen port forwarding click on Network Settings> NAT. Enter the screen port forwarding click on Network Settings> NAT. Enter the screen port forwarding click on Network Settings> NAT. Enter the screen port forwarding click on Network Settings> NAT. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 71 Click on the icon change You can modify the forwarding rule. Click on the icon Clear change You can redirect the rule remove. Keep in mind that the following rules redirection after Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 72: Screen Edit Port Forwarding

    To redirect a range of ports, type in the box number of the start port and end port number field, enter WAN port terminal. port number field, enter WAN port terminal. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 73: Dmz Screen

    All settings on this screen have a higher priority than those configured on the screen Network Settings> NAT> Port All settings on this screen have a higher priority than those configured on the screen Network Settings> NAT> Port Forwarding. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 74: Screen Connection

    Network Settings> NAT> Connections. this screen by clicking on Network Settings> NAT> Connections. Figure 8-5 Network Settings> NAT> Connections Figure 8-5 Network Settings> NAT> Connections The following table summarizes the available fields on this screen. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 75: Alg Screen 8.5

    Figure 8-6 Network Settings> NAT> ALG Figure 8-6 Network Settings> NAT> ALG 8.6 Technical details The subsections below describe the technological aspects of the topics dealt with in this chapter. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 76: Basic Definitions Nat

    (ILA) is the default address on the LAN and the inside global address (IGA) is the default address WAN. For incoming packets, the ILA is the destination address on the LAN, and the IGA is the destination address on the WAN. NAT translates the private (local) Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 77 Internet. LTE modem keeps a record of the original IP addresses and port numbers so incoming packets can easily restore the original values. The following diagram describes the principle described above. Figure 8-7 How NAT works Figure 8-7 How NAT works Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 78: Dynamic Dns

    IP address as the domain name yourhost.dyndns.org. This feature is useful if you want to use URL www.yourhost.dyndns.org and get to the destination of your domain name. Dynamic DNS can not be used if you have a private WAN IP address. 9.2 Dynamic DNS Screen Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 79: Firewall 10

    ( 3 and 4). not blocked ( 3 and 4). not blocked ( 3 and 4). not blocked ( 3 and 4). Figure 10-1 The default firewall settings Figure 10-1 The default firewall settings Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 80: What You Need To Know

    10.2 General Screen Through this screen, you can firewall enabled or disabled. screen In general by clicking on Security> Firewall. In general by clicking on Security> Firewall. In general by clicking on Security> Firewall. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 81: Screen Services

    Services. Before creating rules using the menu Security> Firewall> Access Control> Add new ACL rule Services. Before creating rules using the menu Security> Firewall> Access Control> Add new ACL rule it is first necessary to add at least one maintenance item on this screen. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 82: Screen Add A New Maintenance Item

    Firewall> Access Control> Add new ACL rule. To access this menu, go to the screen Security> Firewall> Services and click on Add a new service item. Services and click on Add a new service item. Services and click on Add a new service item. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 83: Screen Access Control 10.4

    The following screen, click on Security> Firewall> Access Control The following screen, click on Security> Firewall> Access Control Part of the screen is a list of configured ACL rules for incoming or outgoing data stream. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 84 ( REFUSE) or received ( ACCEPT). adjust Click on the icon adjust You can edit the policy. Click on the icon adjust You can edit the policy. Click on the icon adjust You can edit the policy. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 85: Screen Add New / Edit Acl Rule

    Choose easy or Range depending on whether you want ACL rule relate to a single IP Choose easy or Range depending on whether you want ACL rule relate to a single IP Type source address or range. Choose address Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 86 TCP reset packet or ICMP unreachable recipients ( REFUSE) discarded with sending TCP reset packet or ICMP unreachable recipients ( REFUSE) or received ( ACCEPT). or received ( ACCEPT). Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 87: Screen Dos

    Click on Cancel restore previous settings in this section. Click on Cancel restore previous settings in this section. Cancel 10.6 Technical details about firewall The subsections below describe the technological aspects of the topics dealt with in this chapter. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 88: Tips To Strengthen Security Firewall

    4 Not newly created rule conflicts with an existing? - - - - End Once the answer to the above questions is a simple matter of adding rules to fill the relevant fields in the web interface. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 89: Mac Address Filter

    Click on Security > MAC address filter. selecting devices. Click on Security > MAC address filter. selecting devices. Click on Security > MAC address filter. selecting Allow displays additional options, see below. Allow displays additional options, see below. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 90 MAC address. This is the serial number of the MAC addresses. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 91 Clicking Use save your changes. Click on Cancel restore previous settings in this section. Click on Cancel restore previous settings in this section. Click on Cancel restore previous settings in this section. Cancel Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 92: Parental

    Figure 12-1 Security> Parental Figure 12-2 Security> Parental control (after adding a new PCP) Figure 12-2 Security> Parental control (after adding a new PCP) The following table summarizes the available fields on this screen. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 93: Add New / Edit Pcp

    Click on the button Add a new PCP on the screen parental to add a new rule, or click on the icon adjust next to one of the existing rules. Using this dialog box you can set a rule limiting access and configure URL filtering, which if valid rules will not be available. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 94 If you select Block, LTE modem will block access to the web setting network If you select Block, LTE modem will block access to the web setting network If you select Block, LTE modem will block access to the web Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 95 If you highlight some of the words on the list, you can remove it by clicking on Clear. Click this button to save your changes settings LTE modem. Click this button to return to the previous screen without saving. back Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 96: L2Tp Vpn

    Add a new tunnel This is the serial number of the L2TP tunnel. Allowed This field shows whether it is appropriate L2TP tunnel is active or not. Name of the tunnel. name of tunnel Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 97: Screen Add New Tunnel / Tunnel Modification

    VPN tunnel on screen Security> L2TP VPN. new tunnel or icon change in line with the relevant VPN tunnel on screen Security> L2TP VPN. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 98 L2TP to form in the layer 2 tunnel (tunnel BCP) OSI reference model. Select the protocol, which will run through user authentication (EAP or authentication protocol MSCHAPv2 MSCHAPv1). IP address of the server IP address of the remote gateway. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 99: Screen Monitor

    In this field the IP address of the computer connected to the LTE modem via L2TP address VPN tunnel. Current status Text description of the current state of the connection to the L2TP VPN tunnel. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 100: Configuration Example L2Tp Vpn Tunnel Layer 3

    Network Settings> Static Routing, or on the icon adjust on the right side of the table). By default, the CPE does not send any data flow through the L2TP tunnel. IN Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 101: Configuration Example L2Tp Vpn Tunnel Layer 2

    L2TP VPN tunnel Layer 2 can be set using the web configuration screen L2TP VPN. subnet. L2TP VPN tunnel Layer 2 can be set using the web configuration screen L2TP VPN. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 102 L2TP tunnel BCP (bcp0). Users can send packets from one PC on the LAN to another (ie. The address of 192.168.1.58 to 192.168.1.214). Configuration: Figure 13-8 Example configuration L2TP VPN tunnel Layer 2 Add a new tunnel Figure 13-8 Example configuration L2TP VPN tunnel Layer 2 Add a new tunnel Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 103: Gre Vpn

    Table 14-1 Security> GRE VPN> Settings Item Description Click this button to create a new GRE tunnel. Add a new tunnel This is the serial number of rules. Check the box to activate the rule. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 104: Screen Add New Tunnel / Tunnel Modification

    VPN tunnel on screen Security> VPN GRE. new tunnel or icon change in line with the relevant VPN tunnel on screen Security> VPN GRE. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 105 LAN from the same subnet domain. Use a third layer, if the IP addresses of both computers on the LAN subnet in different domains. Server IP Address This is the IP address or domain name of the remote gateway to which WAN LTE modem interface tunnel stream. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 106: Configuration Example Gre Vpn Tunnel Layer 2

    ( Security > GRE VPN and click on Add a new tunnel) configuration ( Security > GRE VPN and click on Add a new tunnel) configuration ( Security > GRE VPN and click on Add a new tunnel) Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 107: Configuration Example Gre Vpn Tunnel Layer 3

    192.168.1.51. CPE B has a WAN IP 172.23.40.105 to which it is within the LAN connected computer with an IP address of 192.168.2.53. IP address of the computer on the LAN must come from a different domain subnet. A CPE Make settings as follows: Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 108 192.168.2.0/24 through the tunnel (gateway IP address: 192.168.3.2). Figure 14-7 Example configuration GRE VPN tunnel Layer 3 static routing Add new Figure 14-7 Example configuration GRE VPN tunnel Layer 3 static routing Add new Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 109: Voip

    You can also go to the screen system monitor and register the VoIP server manually. Figure 15-1 Static routing via Voice Figure 15-1 Static routing via Voice Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 110: What You Need To Know

    G.168 is an ITU-T standard, which eliminates echoes caused " reflection " your voice in a telephone receiver during the call. Where to learn more For more information on SIP, see chapter 15.6 Technical details. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 111: Before

    Hide more. make on this screen display only the required fields, click on Hide more. Figure 15-2 VoIP> SIP> SIP Service Provider Figure 15-2 VoIP> SIP> SIP Service Provider Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 112 Enter the name of your SIP provider. The name of the service provider SIP Enter the port number on which LTE modem listens VoIP Local SIP port communication (if available). Otherwise the field Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 113 100rel required. selecting disabled this feature off. brand 100rel required. selecting disabled this feature off. Enable DNS SRV (RFC Check this box to activate sending requests to DNS servers of your ISP to list 3263) Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 114 LTE modem for SIP traffic (UDP). outbound proxy Allow Check this box if your service provider VoIP It provides outbound SIP server for voice calls. This will allow LTE Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 115 If you enter a shortcut key, which does not include the parameter " Call press " you hear short acknowledgment tone. If it does not, it means that you have entered a keyboard shortcut Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 116 Shortcut to turn off call forwarding if the dialed number does not match the the number does not match SIP. Allow call forwarding if it is Shortcut to activate call forwarding if the number is busy. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 117: Screen Sip Account

    The icon, which shows whether the SIP account is active or not. Symbol yellow light bulb means that the SIP account is active. Symbol gray bulb means that the SIP account is not active. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 118: Configuring Sip Account

    Using this screen, you can adjust the parameters of your SIP account. To access this screen, click on the icon adjust next to an existing account. icon adjust next to an existing account. icon adjust next to an existing account. Figure 15-4 SIP account: Edit Figure 15-4 SIP account: Edit Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 119 G.729 It requires a baud rate only 8 kbps. Select the primary option LTE G.729 It requires a baud rate only 8 kbps. Select the primary option LTE • modem for encoding / decoding Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 120 Check this box if you want all the unanswered incoming calls diverted to a specified feature phone number. (see Ring time when phone number. (see Ring time when Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 121: Screen Region

    On this screen, you can adjust the settings, which differ depending on the country you are LTE modem. To access this screen, click on VoIP> Phone> Region. access this screen, click on VoIP> Phone> Region. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 122: Screen 15.5 Rules Call

    After setting the rules, you can speed dial the appropriate call a contact simply set a keyboard shortcut for quick dialing (eg. # 01). To open this screen, click on VoIP> Rules call. To open this screen, click on VoIP> Rules call. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 123 In this field there is a brief description of the number to be dialed by pressing the speed dial Description keys. Use these icons to rule the speed dial to edit or delete. change Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 124: Technical Details

    - eg. johndoe@your-ITSP.com or 1122334455@VoIP-provider.com. consist of letters, like the e-mail address - eg. johndoe@your-ITSP.com or 1122334455@VoIP-provider.com. consist of letters, like the e-mail address - eg. johndoe@your-ITSP.com or 1122334455@VoIP-provider.com. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 125 AND and B both of which can serve as a user agent and initiate the call. phones AND and B They can simultaneously serve as an agent for a user to answer an incoming call. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 126 SIP Redirect Server receives all SIP requests, translates the destination address to the IP address and sends the translated IP address back to a device that has sent the request. Client device that has sent the request may then send requests directly to the IP address that Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 127 During registration server authenticates the user name and password. Real-time Transport Protocol (or RTP) is a protocol packet standardizing the delivery of audio and visual (video) data over the Internet. For more information on RTP, see RFC 3550th Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 128 G.726 is based on the variation of pulse code modulation adaptive differential (ADPCM), which is less • demanding in terms of bandwidth than standard PCM. ADPCM converts analog sound into digital signals based on the difference between each sound Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 129: Quality Of Service (Qos)

    However it is recommended to use a dedicated button, which is much more accurate timing. When manually tapping may be too long to hold the key to the suspension assessed as call termination. Double-click / flash is used to control additional telephone services. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 130 Call waiting in Europe This feature allows you to hold the current call and answer the second, the same telephone number. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 131 If a command is entered during the initial period expires for detecting tap / flash or enter an invalid type of command, the operation will be interrupted. Table 15-7 Commands for additional functions tap / flash Table 15-7 Commands for additional functions tap / flash The first Command Description button Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 132 3 Once the other party accepts the new call, press the flash will create step 3 Once the other party accepts the new call, press the flash will create conference call. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 133 7 To re-establish the conference call into two separate calls, press flash. This time, the call connection with a second subscriber, the first call is put on hold. - - - - End Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 134: Status Lte

    Screen status LTE It contains detailed information on the ongoing LTE connectivity. Screen status LTE It contains detailed information on the ongoing LTE connectivity. Figure 16-1 System Monitor> Status LTE Figure 16-1 System Monitor> Status LTE Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 135: System 17 Logs

    The following table describes the severity level of each entry in the system log. Table 17-1 Severity level of system log Table 17-1 Severity level of system log LEVEL CODE Emergency (EMERG): The system is unusable. Alert (ALERT) is required immediate action. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 136: System Log Screen

    For more information about the different levels of severity, see Table 17 to 1 Restore Click to refresh the list of records in the system log. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 137: Screen Recording Calls

    Click to remove all entries in the log. This field indicates the serial number only and is not connected with the corresponding item in the list. This field contains the date and time of the event record. Time Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 138: Screen History Voip Calls

    " Peer " number " Peer " number " Peer " number " Peer " number This field is the type of call. Interface This field specifies the duration of the call. Duration Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 139: User Account

    You can change the password to your account user ( user account). You can change the password to your account user ( user account). Enter the default or existing password you use to log into the configuration existing password interface. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 140 Clicking Use save your changes. Click on Cancel restore previous settings in this section. Click on Cancel restore previous settings in this section. Click on Cancel restore previous settings in this section. Cancel Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 141: System

    Remember amended entries Full computer name and enter the name in the field hostname in the configuration interface. The following screen, click on Device Management> System. The following screen, click on Device Management> System. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 142: Screen Encryption Key

    Screen 19.3 Encryption Key LTE modem works with encryption key for secure communication between outdoor and indoor unit. Before the first use of the modem are advised to update the encryption key. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 143: Common Usage: Set Of Indoor And Outdoor Unit

    4 Wait for the successful restart LTE modem. Figure 19-4 Device Management> System> Encryption key> Update: Restart Figure 19-4 Device Management> System> Encryption key> Update: Restart - - - - End Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 144: A New Outdoor Unit And Indoor Unit Original

    Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 145 3 Upon restart, use the username and password for the network, which is stated on the label interior step 3 Upon restart, use the username and password for the network, which is stated on the label interior unit. - - - - End Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 146: Setting The Time

    Figure 20-1 Device Management> Time Settings Figure 20-1 Device Management> Time Settings The following table summarizes the available fields on this screen. Table 20-1 Device Management> Time Settings Table 20-1 Device Management> Time Settings Item Description Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 147 For example, in Germany it will be 2 Because the time zone in Germany is one hour ahead of GMT (GMT + 1). Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 148 For example, in Germany, it will be 2 because the time zone in Germany is one hour ahead of GMT (GMT + 1). Clicking Use save your changes. Clicking Use save your changes. Clicking Use save your changes. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 149: Setting Logging

    To change the logging LTE modem, click on Device Management> Log Settings. The screen below. Figure 21-1 Device Management> Settings logging Figure 21-1 Device Management> Settings logging The following table summarizes the available fields on this screen. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 150 Clicking Use save your changes. Click on Cancel restore previous settings in this section. Click on Cancel restore previous settings in this section. Click on Cancel restore previous settings in this section. Cancel Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 151: Upgrade Software

    The upgrade process takes place via HTTP (Hypertext Transfer Protocol) and may take up to five minutes. After successfully uploading the update file will restart the system. NOTICE During the update, DO NOT turn off LTE modem fundamentally! Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 152 After updating LTE modem, wait a few minutes before re-logging into the configuration interface. Figure 22-2 Warnings for firmware update Figure 22-2 Warnings for firmware update Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 153 If the firmware update failed, an error message will be displayed. Clicking OK to return to the screen Upgrade If the firmware update failed, an error message will be displayed. Clicking OK to return to the screen Upgrade software. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 154: Online Update

    During the update, DO NOT turn off LTE modem fundamentally! If you want to automatically check for updates online to off, select the menu Periodic online updates possibility Prohibit. Periodic online updates possibility Prohibit. Periodic online updates possibility Prohibit. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 155 If you select Check software and warn or Check software and automatically update you will be able to set the time in which to carry out a control ( Time controls). set the time in which to carry out a control ( Time controls). Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 156: Types Of Online Updates

    There is a new version of firmware for the LTE module, but not for LTE modem itself. Figure 23-5 Device Management> Online Update: Update only LTE module Figure 23-5 Device Management> Online Update: Update only LTE module Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 157: Online Update Process

    Figure 23-7 Device Management> Online Update: Entering URLs step 2 If there is a new firmware version, a pop-up window. step 2 If there is a new firmware version, a pop-up window. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 158 Pop-up on the progress of the update. If you do not want or need the firmware update, click on No or click X. Pop-up window will close, and the update will not run. Figure 23-9 Device Management> Online Update: Warning firmware update Figure 23-9 Device Management> Online Update: Warning firmware update Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 159 4 Under normal circumstances, it takes firmware updates for approximately five minutes. After a successful update step 4 Under normal circumstances, it takes firmware updates for approximately five minutes. After a successful update login screen. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 160 2 If there is a new firmware version, a pop-up window. If the step 2 If there is a new firmware version, a pop-up window. If the There updating firmware and modem module will first firmware update Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 161 Pop-up on the progress of the update. If you do not want or need the firmware update, click on No or click X. Pop-up window will close, and the update will not run. Figure 23-16 Device Management> Online Update: Warning firmware update Figure 23-16 Device Management> Online Update: Warning firmware update Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 162 System Monitor> Status LTE Check correct firmware version of the module. interface and on-screen System Monitor> Status LTE Check correct firmware version of the module. interface and on-screen System Monitor> Status LTE Check correct firmware version of the module. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 163 Start the update by clicking Yes. Figure 23-21 Device Management> Online Update: popup announcing the availability of a new firmware CPE Figure 23-21 Device Management> Online Update: popup announcing the availability of a new firmware CPE units Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 164 System Monitor> Status LTE Check correct firmware version. Figure 23-23 System Monitor> Status LTE: To check the software version Figure 23-23 System Monitor> Status LTE: To check the software version - - - - End Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 165: Backup / Restore

    2 Clicking backup log save the system log file LTE modem in step 2 Clicking backup log save the system log file LTE modem in counting. - - - - End Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 166 If the renewal failed, you will receive an error message. Clicking OK to return to the Settings screen. If the renewal failed, you will receive an error message. Clicking OK to return to the Settings screen. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 167 LTE modem reset back to factory default settings, it is also possible to press RESET on the rear panel. • More information about the key RESET please see chapter 1.7. More information about the key RESET please see chapter 1.7. More information about the key RESET please see chapter 1.7. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 168: Reboot Screen

    Step 1 Click on Device Management> Restart. Click on the button restart to restart LTE modem. Restarting will not affect the settings LTE modem. Figure 25-1 restart Figure 25-1 restart - - - - End Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 169: Diagnosis

    Click on the button ping and the result to test its availability. Click on the button ping and the result to test its availability. Click on the button ping and the result Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 170 Diagnostics. Click this button to perform a traceroute command. The result of this command is a TraceRoute breakdown of the data paths pact to a specific host. Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 171: Troubleshooting

    3 If this does not work, the only solution is to reset the modem to factory step 3 If this does not work, the only solution is to reset the modem to factory Settings. See 1.5.3 RESET button. - - - - End I forgot my password. Issue 01 Copyright © Huawei Technologies Co., Ltd.
  • Page 172 4 If this does not work, the only solution is to reset the modem to factory step 4 If this does not work, the only solution is to reset the modem to factory Settings. See Screen 24.2 Backup / Restore. - - - - End Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 173: Internet Access

    - - - - End 27.5 Wireless Internet access What factors can cause intermittent or unstable wireless connection? How can I solve this problem? Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 174: Telephone Calls And Voip

    If the call is successful, it is possible that a fault has occurred SIP server. Contact your VoIP service provider. - - - - End Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 175: Upnp

    When using the chat application not work some functions, for example. File transfer or video. Step 1 Wait at least three minutes. Step 1 Wait at least three minutes. step 2 Restart. step 2 Restart. - - - - End Issue 01 Copyright © Huawei Technologies Co., Ltd.

  • Page 176: Privacy

    User data collected in this LTE modem is necessary to process and treat them in accordance with applicable laws and regulations, such as the General Regulation on the Protection of Personal Data (GDPR) in European Union countries. Issue 01 Copyright © Huawei Technologies Co., Ltd.

This manual is also suitable for:

B2368-22B2368-66B2368-57

Table of Contents