LTE CPE B2368 User's
Guide
Figure 13-2 Add new tunnel / tunnel Modifications
Figure 13-2 Add new tunnel / tunnel Modifications
The following table summarizes the available fields on this screen.
Table 13-2 Add new tunnel / tunnel Modifications
Table 13-2 Add new tunnel / tunnel Modifications
Item
setting L2TP
Allowed
name of tunnel
L2TP layer
authentication protocol
IP address of the server
Issue 01
Description
Check the box to activate the L2TP tunnel.
Leave the box unchecked if you do not currently use the tunnel.
Enter a descriptive name for the L2TP tunnel.
choose Layer3 L2TP for creating a tunnel in layer 3 of the OSI reference model.
choose Layer3 L2TP for creating a tunnel in layer 3 of the OSI reference model.
choose Layer3 L2TP for creating a tunnel in layer 3 of the OSI reference model.
choose layer2 L2TP to form in the layer 2 tunnel (tunnel BCP) OSI reference
choose layer2 L2TP to form in the layer 2 tunnel (tunnel BCP) OSI reference
choose layer2 L2TP to form in the layer 2 tunnel (tunnel BCP) OSI reference
model.
Select the protocol, which will run through user authentication (EAP or
MSCHAPv2 MSCHAPv1).
IP address of the remote gateway.
Copyright © Huawei Technologies Co., Ltd.
13 L2TP VPN
95