Huawei B2368 Series User Manual page 50

LTE CPE B2368 User's
Guide
user Authentication
User authentication is the process during which there is access to check the legitimacy of a particular wireless client
device to the network. Wireless network as possible to secure the necessary signing. To do this it is necessary that
each device in your wireless network support the IEEE 802.1x standard.
User names and passwords for each user can be stored on the RADIUS server. Use of this site is not typical for
commercial rather than residential use. If you do not have a RADIUS server is available, you can not access the
wireless network to make the user logon.
Unauthorized wireless devices can still see all the data flow in the wireless network, despite the fact that they
themselves can not use the network. To do this, there are ways that attackers can obtain a valid user name and
password. Then, the wireless network can simply log.
encryption
Encryption is primarily used to protect information that is sent over a wireless network. Encryption of wireless networks, like
any other, works on the principle of the secret key. If you do not know the key to decrypt the message, you will not
understand it.
Types of encryption that are available, depending on the authentication method.
Figure 5-10 Encryption types for different authentication methods Figure 5-10 Encryption types for different authentication methods
You can choose no security, WPA-PSK or WPA2-PSK. You can choose no security, WPA-PSK or WPA2-PSK. You can choose no security, WPA-PSK or WPA2-PSK. You can choose no security, WPA-PSK or WPA2-PSK.
We strongly recommend using the highest level of security to devices on the network support. Consider two
devices that wish to access the wireless network. And while the device only supports WPA-PSK method, device
B supports both WPA-PSK and WPA2-PSK. Therefore, the mode of wireless security should be WPA-PSK. B supports both WPA-PSK and WPA2-PSK. Therefore, the mode of wireless security should be WPA-PSK.
If the configuration interface LTE modem select the security mode WPA2-PSK, If the configuration interface LTE modem select the security mode WPA2-PSK,
You will also have the option to select WPA compatible. making the network will have access and devices You will also have the option to select WPA compatible. making the network will have access and devices You will also have the option to select WPA compatible. making the network will have access and devices
that only support WPA-PSK method. In the event that one of your machine supports WPA-PSK and
WPA2-PSK some, set the security mode to
WPA2-PSK and tick WPA compatible. WPA2-PSK and tick WPA compatible. WPA2-PSK and tick WPA compatible.
Most methods of encryption to protect information sent by the wireless network key. The longer the key, the stronger
the security. Each device on the wireless network must be accessed using the same key.
Issue 01
NOTE
It is recommended that each wireless network has been protected by encryption WPA-PSK or It is recommended that each wireless network has been protected by encryption WPA-PSK or It is recommended that each wireless network has been protected by encryption WPA-PSK or
WPA2-PSK. Other encryption methods are on one side better than none, but the security level is relatively low WPA2-PSK. Other encryption methods are on one side better than none, but the security level is relatively low
and gain access data is not difficult for an attacker.
Copyright © Huawei Technologies Co., Ltd.
5 Wireless WiFi 2.4 / 5 GHz
47