Wireless; Wlan Button - Huawei B2368 Series User Manual

LTE CPE B2368 User's
Guide
Figure 1-2 Wiring VoIP calls made using LTE modem Figure 1-2 Wiring VoIP calls made using LTE modem
LTE modem sends your call to the SIP server VoIP service provider, where it is then forwarded to other VoIP
device or telephone connected to the public switched telephone network (PSTN). For telephone support SIP and
IAD on the home LAN is necessary to enable the SIP ALG this modem.

1.1.3 Wireless

By default, the WLAN broadcast LTE modem active. If a wireless network is active, the LTE modem to connect
devices that support IEEE protocols
802.11b / g / n / ac and have access to network resources. You can configure the wireless network using WPS (Wi-Fi
Protected Setup) or client device to manually add the network.
Figure 1-3 Diagram Wireless Figure 1-3 Diagram Wireless

1.2 WLAN Button

Press WPS on the back of the modem (internal unit) can wireless 2.4 GHz and 5 GHz bands on and off. The Press WPS on the back of the modem (internal unit) can wireless 2.4 GHz and 5 GHz bands on and off. The Press WPS on the back of the modem (internal unit) can wireless 2.4 GHz and 5 GHz bands on and off. The
button can also be used to activate WPS, allowing you to quickly configure the wireless network with strong
security.
Issue 01 Copyright © Huawei Technologies Co., Ltd.
Content
7