The More Ap Screen - Huawei B2368 User Manual

LTE CPE B2368
User Guide
Label
Security Mode
Show Password
Pre-Shared Key
more.../hide
more
WPA-PSK
Compatible
Encryption

5.3 The More AP Screen

The LTE Device can broadcast up to four wireless network names at the same time. This
means that users can connect to the LTE Device using different SSIDs. You can secure the
connection on each SSID profile so that wireless clients connecting to the LTE Device using
different SSIDs cannot communicate with each other.
This screen allows you to enable and configure multiple Basic Service Sets (BSSs) on the
LTE Device.
Click Network Setting > Wireless (or Wireless 5G) > More AP. The following screen
displays.
Figure 5-6 Network Settings > Wireless > More AP
The following table describes the Labels in this screen.
Issue 03 (2019-01-31)
Description
Select WPA-PSK or WPA2-PSK from the drop-down list box.
Select this to display the password as readable text.
Type a pre-shared key from 8 to 63 case-sensitive ASCII characters.
Click more... to show more fields in this section. Click hide more to
hide them.
This field appears when you choose WPA2-PSK as the Security Mode.
Check this field to allow wireless devices using WPA-PSK security
mode to connect to your LTE Device. The LTE Device supports WPA-
PSK and WPA2-PSK simultaneously.
If the security mode is WPA-PSK, the encryption mode is set to TKIP
to enable Temporal Key Integrity Protocol (TKIP) security on your
wireless network.
If the security mode is WPA2-PSK and WPA-PSK Compatible is
disabled, the encryption mode is set to AES to enable Advanced
Encryption System (AES) security on your wireless network. AES
provides superior security to TKIP.
If the security mode is WPA2-PSK and WPA-PSK Compatible is
enabled, the encryption mode is set to TKIPAES MIX to allow both
TKIP and AES types of security in your wireless network.
Copyright © Huawei Technologies Co., Ltd.
5 Wireless
44