Reece Posh Solus Powder Room Vanity Unit Manual

Reece Posh Solus Powder Room Vanity Unit Manual

Advertisement

Posh Solus Powder Room Vanity Unit
475
180
445

SPECIFICATIONS

Recommended Use
Basin Material
Cabinet Material
Colour
Integrated Overflow
Plug & Waste
Fixing
Taphole

CLEANING RECOMMENDATIONS

We recommend the use of soapy water or approved cleaners.
This product should not be cleaned with abrasive materials.
Damage caused by any improper treatment is not covered by the product warranty- refer to Warranty Conditions.
Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade
people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range
without prior notification. Dimensions are nominal measurements only. Dimensions and set-outs listed are correct
at time of publication however the manufacturer/distributor takes no responsibility for printing errors.
Tech Page Version 1
Domestic, Hotel, and Commercial
Vitreous China
2-pak Gloss Finish Moisture Resistant MDF
White
Yes
32x40mm with Overflow (not supplied)
Top siliconed to cabinet, cabinet screwed back
to wall NOTE: Fixings not supplied
1 Taphole-Right Hand Only
235
Dimensions are nominal measurements only.
To see the complete POSH range go to
www.reece.com.au/bathrooms
Page 1 of 3
475

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Posh Solus Powder Room Vanity Unit and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Reece Posh Solus Powder Room Vanity Unit

  • Page 1 Page 1 of 3 Posh Solus Powder Room Vanity Unit Dimensions are nominal measurements only. SPECIFICATIONS Recommended Use Domestic, Hotel, and Commercial Basin Material Vitreous China Cabinet Material 2-pak Gloss Finish Moisture Resistant MDF Colour White Integrated Overflow Plug & Waste...
  • Page 2 If fixing to timber framed wallls or partitioning, care should be taken to properly reinforce wall. Please check vanity unit for damage before installing. If there is damage, please notify Reece branch where the product was purchased to organise a replacement product. Installation of the vanity unit is deemed as accepting the condition of the vanity unit.
  • Page 3 Page 3 of 3 Posh Solus Powder Room Vanity Unit INSTALLATION INSTRUCTIONS FOR ASSEMBLY • First, check the content to make sure that nothing is missing • Sort out the parts and fittings as shown. Assemble product step by step •...

Table of Contents