About Transferring Files Via Usb Connection; Install Software Updates With Autoinstall - Honeywell CN80 Series User Manual

5. If prompted, enter additional information, and click Submit.
6. Select Download. Follow the prompts to download the file.

About Transferring Files via USB Connection

If you plan on using a USB connection to transfer the upgrade files to the mobile
computer, make sure you set the USB connection to allow file transfers. To learn
more, see

Install Software Updates with AutoInstall

Important: The Dolphin CN80 must have power for the entire length of the upgrade process or it
could become unstable. Do not attempt to remove the battery during the process.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the toggle button to turn Provisioning mode On.
4. Save the upgrade file (*.zip or *.apk) in one of the following folders on the CN80
5. Swipe up from the bottom of the Home screen to access all apps.
6. Tap AutoInstall Settings
7. Tap Packages Update from the AutoInstall Settings screen.
8. Once installation is complete, turn Provisioning mode Off.
Note: Some updates do not require the computer to reboot before installation.
100
Configure USB Connection and Transfer Files
> Honeywell Settings > Provisioning mode.
mobile computer:
• Internal shared storage\honeywell\autoinstall
Software upgrades saved to this folder for installation do not persist when a
Full factory reset or Enterprise data reset is performed.
• IPSM card\honeywell\autoinstall
Software upgrades saved to this folder do not persist when a Full factory
reset is performed. However, the upgrade does persist if an Enterprise data
reset is performed.
The computer automatically initiates a reboot and installs the software
upgrade. The system update screen appears during the upgrade process. When
the update is finished, the lock screen appears.
and Enable AutoInstall
CN80 Mobile Computer Series User Guide
on page 32.
.