Cisco Nexus 93360YC-FX2 Hardware Installation Manual page 43

Installing the Chassis
Step 5
Listen for the fans; they should begin operating when the power supply is powered.
Step 6 After the switch boots, verify that the following LEDs are lit:
• On the fan modules, the Status (STA or STS) LED is green.
If a fan module Status LED is not green, try reinstalling the fan module.
• After initialization, the switch chassis Status (labeled as STA or STS) LED is green.
Step 7
Verify that the system software has booted and the switch has initialized without error messages.
A setup utility automatically launches the first time that you access the switch and guides you through the basic
configuration. For instructions on how to configure the switch and check module connectivity, see the appropriate Cisco
Nexus 9000 Series configuration guide.
Cisco Nexus 93360YC-FX2 NX-OS Mode Switch Hardware Installation Guide
Starting the Switch
35